Klipsch · Reference Premiere · Floorstander

RP-8263FA III

Product description
The flagship of Reference Premiere III — the RP-8203F's dual 8-inch Cerametallic woofers and horn-loaded titanium tweeter, with a second two-way section built into the top that fires upward for Dolby Atmos. That height channel is a sealed 6.5-inch Cerametallic woofer and its own 1-inch tweeter, crossed at 2 kHz and wired separately.

Performance — where it sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
RP-8263FA35 Hz25 kHz98 dB8 Ω871 cm²
Median32 Hz30 kHz90 dB6 Ω654 cm²
How to read this chart

Each axis spans the range the 648 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of this speaker's own class, the 600 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

Units
TypeFloorstander
HiFi ladder position#291 of 648 floorstander
PowerPassive
Height1095 mm
Width275 mm
Depth528 mm
Footprint1642 cm²
Space taken179.8 L
Weight—
EnclosureBass reflex, rear port
Drivers1× 25 mm tweeter (titanium LTS dome), 2× 203 mm woofer (Cerametallic cone), 1× 25 mm tweeter (titanium LTS dome), 1× 165 mm mid-bass (Cerametallic cone)
Crossover frequency1630 Hz
Frequency response35–25000 Hz (±3 dB)
Sensitivity98 dB
Impedance8 Ω (min 3.84 Ω)
Power handling150 W
MAP (USD)$1,299.99 each
Where to buyCheck availability ↗
Manufacturerklipsch.com ↗
Product pageOpen product page ↗

Suggested TrueScale comparisons

Tap any speaker to see it beside this one at true, real-world scale.