Suggested TrueScale comparisons
Tap any speaker to see it beside this one at true, real-world scale.
Neat Acoustics · Classic · Floorstander
Elite Classic
$5,250 / pairCheck availability ↗
Product description
Not a tall Petite, which is the thing Neat keeps insisting about its floorstanders. The 150 mm polymer cone is gone; in its place is the R3, a doped-paper unit with a separate metal phase plug that Neat uses from here up to the Ultimatum models. Two ports again, but only the small one is on the back equalising pressure behind the tweeter — the bass port is underneath, firing into a bolted-on plinth, and you don't find it until the speaker is out of the box.
Units
| Type | Floorstander |
|---|---|
| HiFi ladder position | #33 of 557 floorstander |
| Power | Passive |
| Height | 900 mm |
| Width | 200 mm |
| Depth | 180 mm |
| Weight | 13 kg |
| Enclosure | Bass reflex, down-firing port |
| Drivers | 1× 168 mm mid-bass (R3 doped paper cone), 1× 50 mm tweeter (Air Motion Transformer) |
| Frequency response | 25–22000 Hz |
| Sensitivity | 86 dB |
| Impedance | 8 Ω (min 5 Ω) |
| Recommended amp | 25–150 W |
| MAP (USD) | $5,250 / pair |
| Where to buy | Check availability ↗ |
| Manufacturer | neatacoustics.com ↗ |
| Product page | Open product page ↗ |
Suggested TrueScale comparisons
Tap any speaker to see it beside this one at true, real-world scale.