Tannoy · Prestige · Floorstander

Canterbury GR

Product description
A 380 mm Dual Concentric in 235 litres of birch ply behind a 25 mm baffle, at 96 dB sensitivity — loud enough that a few valve watts will drive it properly. Its variable distributed port system lets the low end be tuned to the room rather than assumed, which is the practical answer to a cabinet 680 mm wide that cannot simply be moved somewhere better.

Performance — where it sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
Canterbury28 Hz27 kHz96 dB8 Ω1155 cm²
Median32 Hz30 kHz90 dB6 Ω654 cm²
How to read this chart

Each axis spans the range the 640 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of this speaker's own class, the 592 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

Units
TypeFloorstander
HiFi ladder position#301 of 640 floorstander
PowerPassive
Height1100 mm
Width680 mm
Depth480 mm
Footprint3264 cm²
Space taken359 L
Weight63 kg
EnclosureBass reflex, front port
Drivers1× 52 mm tweeter (aluminium/magnesium alloy dome), 1× 380 mm woofer (paper pulp cone with twin roll impregnated fabric surround)
Crossover frequency1100 Hz
Frequency response28–27000 Hz (±6 dB)
Sensitivity96 dB
Impedance8 Ω (min 5 Ω)
Power handling150–600 W
Recommended amp20–300 W
Where to buyCheck availability ↗
Manufacturerweb.archive.org ↗
Product pageOpen product page ↗

Suggested TrueScale comparisons

Tap any speaker to see it beside this one at true, real-world scale.