TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A

Stands apply to bookshelves only

Speaker B

Stands apply to bookshelves only

References

Front view — side by side at true scale

ACanton Reference 7BKEF R5 Meta
Canton Reference 7 front view
KEF R5 Meta front view

Click either cabinet to swap A ↔ B · Reference height: 1072 mm (107.2 cm) · 1 mm = 0.52 px

Plan view — footprint at true scale

front wall
A1105 cm²257 mm430 mm
B925 cm²269 mm344 mm
0 mm100 mm30 mm

A shelf applies to bookshelf speakers only — one of these stands on the floor.

Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.

Performance — where each one sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
Reference 723 Hz40 kHz87.5 dB4 Ω564 cm²
R5 Meta52 Hz28 kHz87 dB4 Ω393 cm²
Median32 Hz30 kHz90 dB6 Ω654 cm²
How to read this chart

Each axis spans the range the 648 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 600 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

Canton Reference 7vsKEF R5 Meta

The KEF R5 Meta stands 107.2 cm tall — about 8.2 cm more than the Canton Reference 7 at 99.0 cm. On footprint the KEF R5 Meta is the wider cabinet (26.9 cm versus 25.7 cm). The Canton Reference 7 reaches deeper in the bass, down to 23 Hz versus 52 Hz. Low frequencies come from a 154 mm cone on the Canton Reference 7 and a 130 mm cone on the KEF R5 Meta. On price, the Canton Reference 7 sits higher — about $8,500 a pair against $5,999 for the KEF R5 Meta.

Specifications

AB
ManufacturerCantonKEF
ModelReference 7R5 Meta
HiFi ladder position#126 of 648 floorstander#262 of 648 floorstander
Height990 mm1072 mm
Width257 mm269 mm
Depth430 mm344 mm
Footprint1105 cm²925 cm²
Space taken109.4 L99.2 L
Weight33 kg24.5 kg
Enclosurebass-reflex-downbass-reflex-rear
Drivers1× 25 mm tweeter (aluminium-oxide ceramic dome), 1× 154 mm midrange (Black Ceramic Tungsten cone), 2× 154 mm woofer (Black Ceramic Tungsten cone)1× 25 mm tweeter (MAT aluminium dome), 1× 125 mm midrange (aluminium cone), 2× 130 mm woofer (hybrid aluminium cone)
Crossover frequency190 / 3200 Hz400 / 2700 Hz
Frequency — low23 Hz52 Hz
Frequency — high40000 Hz28000 Hz
Sensitivity87.5 dB87 dB
Impedance4 Ω4 Ω
Recommended amp—15–200 W
MAP (USD)$8,500 / pair$5,999 / pair
Where to buyCheck availability ↗Check on Amazon ↗
Brand websitecanton.de ↗international.kef.com ↗
Product pageOpen product page ↗Open product page ↗

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.