TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A

Stands apply to bookshelves only

Speaker B

Stands apply to bookshelves only

References

Front view — side by side at true scale

ACanton Reference 7BMonitor Audio Platinum 300
Canton Reference 7 front view
Monitor Audio Platinum 300 front view

Click either cabinet to swap A ↔ B · Reference height: 1131.1 mm (113.1 cm) · 1 mm = 0.50 px

Plan view — footprint at true scale

front wall
A1105 cm²257 mm430 mm
B2256 cm²429.8 mm525 mm
0 mm100 mm30 mm

A shelf applies to bookshelf speakers only — one of these stands on the floor.

Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.

Performance — where each one sits in the catalog

BassTrebleSensitivityEasy load
Bass reachTreble reachSensitivityEasy load
Reference 723 Hz40 kHz87.5 dB4 Ω
Platinum 30017 Hz60 kHz88 dB4 Ω
Median32 Hz30 kHz90 dB6 Ω
How to read this chart

Each axis spans the range the 648 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 600 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe. Not shown: Cone area — published by only one of the two. An outline reaching one more vertex than its neighbour reads as the bigger speaker when the only difference is which maker filled in a spec sheet. The figure is still in the table below.

Canton Reference 7vsMonitor Audio Platinum 300

The Monitor Audio Platinum 300 stands 113.1 cm tall — about 14.1 cm more than the Canton Reference 7 at 99.0 cm. On footprint the Monitor Audio Platinum 300 is the wider cabinet (43.0 cm versus 25.7 cm). The Monitor Audio Platinum 300 reaches deeper in the bass, down to 17 Hz versus 23 Hz. Low frequencies come from a 154 mm cone on the Canton Reference 7 and a 203 mm cone on the Monitor Audio Platinum 300. On price, the Monitor Audio Platinum 300 sits higher — about $19,999 a pair against $8,500 for the Canton Reference 7.

Specifications

AB
ManufacturerCantonMonitor Audio
ModelReference 7Platinum 300 3G
HiFi ladder position#126 of 648 floorstander#363 of 648 floorstander
Height990 mm1131.1 mm
Width257 mm429.8 mm
Depth430 mm525 mm
Footprint1105 cm²2256 cm²
Space taken109.4 L255.2 L
Weight33 kg53.6 kg
Enclosurebass-reflex-downbass-reflex-rear
Drivers1× 25 mm tweeter (aluminium-oxide ceramic dome), 1× 154 mm midrange (Black Ceramic Tungsten cone), 2× 154 mm woofer (Black Ceramic Tungsten cone)1× tweeter (MPD III (Air Motion Transformer)), 1× 100 mm midrange (RDT III C-CAM), 2× 203 mm woofer (RDT III C-CAM)
Crossover frequency190 / 3200 Hz650 / 3000 Hz
Frequency — low23 Hz17 Hz
Frequency — high40000 Hz60000 Hz
Sensitivity87.5 dB88 dB
Impedance4 Ω4 Ω
Recommended amp—200–800 W
MAP (USD)$8,500 / pair$19,999 / pair
Where to buyCheck availability ↗Check availability ↗
Brand websitecanton.de ↗monitoraudio.com ↗
Product pageOpen product page ↗Open product page ↗

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.