TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A
Speaker B
References

Front view — side by side at true scale

ADali Epicon 2BKEF Q3 Meta
Dali Epicon 2 front view
KEF Q3 Meta front view

Click either cabinet to swap A ↔ B · Reference height: 386 mm (38.6 cm) · 1 mm = 1.45 px

Plan view — footprint at true scale

front wall
A783 cm²214 mm366 mm
B641 cm²210 mm305 mm
0 mm100 mm30 mm
150 mm500 mm300 mm

Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.

Performance — where each one sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
Epicon 247 Hz30 kHz87 dB4 Ω220 cm²
Q3 Meta49 Hz20 kHz87 dB4 Ω219 cm²
Median45 Hz25 kHz87 dB6 Ω219 cm²
How to read this chart

Each axis spans the range the 452 bookshelves in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 380 passive bookshelves — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

Dali Epicon 2vsKEF Q3 Meta

The Dali Epicon 2 stands 38.6 cm tall — about 2.9 cm more than the KEF Q3 Meta at 35.7 cm. The Dali Epicon 2 reaches deeper in the bass, down to 47 Hz versus 49 Hz. On price, the Dali Epicon 2 sits higher — about $8,500 a pair against $999 for the KEF Q3 Meta.

Specifications

AB
ManufacturerDaliKEF
ModelEpicon 2Q3 Meta
HiFi ladder position#282 of 452 bookshelf#216 of 452 bookshelf
Height386 mm357 mm
Width214 mm210 mm
Depth366 mm305 mm
Footprint783 cm²641 cm²
Space taken30.2 L22.9 L
Weight10.3 kg8.2 kg
Enclosurebass-reflex-rearbass-reflex-rear
Drivers1× 29 mm tweeter (soft dome), 1× 165 mm mid-bass (wood-fibre cone)1× 25 mm tweeter (MAT aluminium dome), 1× 165 mm mid-bass (aluminium cone)
Crossover frequency3100 Hz2000 Hz
Frequency — low47 Hz49 Hz
Frequency — high30000 Hz20000 Hz
Sensitivity87 dB87 dB
Impedance4 Ω4 Ω
Recommended amp50–200 W15–150 W
MAP (USD)$8,500 / pair$999 / pair
Where to buyCheck availability ↗Check on Amazon ↗
Brand websitedali-speakers.com ↗international.kef.com ↗
Product pageOpen product page ↗Open product page ↗

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.