TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A

Stands apply to bookshelves only

Speaker B

Stands apply to bookshelves only

References

Front view — side by side at true scale

ADali Epicon 8BKlipsch Klipschorn AK7
Dali Epicon 8 front view
Klipsch Klipschorn AK7 front view

Click either cabinet to swap A ↔ B · Reference height: 1352 mm (135.2 cm) · 1 mm = 0.41 px

Plan view — footprint at true scale

front wall
A1280 cm²264 mm485 mm
B5727 cm²801 mm715 mm
0 mm100 mm30 mm

A shelf applies to bookshelf speakers only — one of these stands on the floor.

Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.

Performance — where each one sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
Epicon 835 Hz30 kHz89 dB5 Ω873 cm²
Klipschorn AK734 Hz19 kHz103 dB8 Ω1165 cm²
Median32 Hz30 kHz90 dB6 Ω654 cm²
How to read this chart

Each axis spans the range the 648 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 600 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

Dali Epicon 8vsKlipsch Klipschorn AK7

The Klipsch Klipschorn AK7 stands 135.2 cm tall — about 12.7 cm more than the Dali Epicon 8 at 122.5 cm. On footprint the Klipsch Klipschorn AK7 is the wider cabinet (80.1 cm versus 26.4 cm). At 103 dB against 89 dB, the Klipsch Klipschorn AK7 is the easier load to drive and plays louder from the same amplifier. Low frequencies come from a 200 mm cone on the Dali Epicon 8 and a 381 mm cone on the Klipsch Klipschorn AK7. On price, the Dali Epicon 8 sits higher — about $23,000 a pair against $19,998 for the Klipsch Klipschorn AK7.

Specifications

AB
ManufacturerDaliKlipsch
ModelEpicon 8Klipschorn AK7
HiFi ladder position#475 of 648 floorstander#556 of 648 floorstander
Height1225 mm1352 mm
Width264 mm801 mm
Depth485 mm715 mm
Footprint1280 cm²5727 cm²
Space taken156.8 L774.3 L
Weight47.5 kg118 kg
Enclosurebass-reflex-rear—
Drivers1× 55 mm super-tweeter (planar ribbon), 1× 29 mm tweeter (soft dome), 1× 165 mm midrange (wood-fibre cone, SMC motor), 2× 200 mm woofer (wood-fibre cone, SMC motor)1× 25 mm tweeter (K-771 compression diaphragm), 1× 51 mm midrange (K-933-HP compression diaphragm), 1× 381 mm woofer (K-33-E fiber-composite cone)
Crossover frequency550 / 3100 / 15000 Hz380 / 2900 Hz
Frequency — low35 Hz34 Hz
Frequency — high30000 Hz19000 Hz
Sensitivity89 dB103 dB
Impedance5 Ω8 Ω
Recommended amp50–500 W—
MAP (USD)$23,000 / pair$19,998 / pair
Where to buyCheck availability ↗Check availability ↗
Brand websitedali-speakers.com ↗klipsch.com ↗
Product pageOpen product page ↗Open product page ↗

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.