TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A

Stands apply to bookshelves only

Speaker B

Stands apply to bookshelves only

References

Front view — side by side at true scale

ADali Epicon 8BKlipsch RP-8000F II
Dali Epicon 8 front view
Klipsch RP-8000F II front view

Click either cabinet to swap A ↔ B · Reference height: 1225 mm (122.5 cm) · 1 mm = 0.46 px

Plan view — footprint at true scale

front wall
A1280 cm²264 mm485 mm
B1301 cm²281 mm463 mm
0 mm100 mm30 mm

A shelf applies to bookshelf speakers only — one of these stands on the floor.

Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.

Performance — where each one sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
Epicon 835 Hz30 kHz89 dB5 Ω873 cm²
RP-8000F II35 Hz25 kHz98 dB8 Ω652 cm²
Median32 Hz30 kHz90 dB6 Ω654 cm²
How to read this chart

Each axis spans the range the 648 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 600 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

Dali Epicon 8vsKlipsch RP-8000F II

The Dali Epicon 8 stands 122.5 cm tall — about 13.0 cm more than the Klipsch RP-8000F II at 109.5 cm. On footprint the Klipsch RP-8000F II is the wider cabinet (28.1 cm versus 26.4 cm). At 98 dB against 89 dB, the Klipsch RP-8000F II is the easier load to drive and plays louder from the same amplifier. On price, the Dali Epicon 8 sits higher — about $23,000 a pair against $599 for the Klipsch RP-8000F II.

Specifications

AB
ManufacturerDaliKlipsch
ModelEpicon 8RP-8000F II
HiFi ladder position#475 of 648 floorstander#289 of 648 floorstander
Height1225 mm1095 mm
Width264 mm281 mm
Depth485 mm463 mm
Footprint1280 cm²1301 cm²
Space taken156.8 L142.5 L
Weight47.5 kg27.8 kg
Enclosurebass-reflex-rearbass-reflex-rear
Drivers1× 55 mm super-tweeter (planar ribbon), 1× 29 mm tweeter (soft dome), 1× 165 mm midrange (wood-fibre cone, SMC motor), 2× 200 mm woofer (wood-fibre cone, SMC motor)1× 25 mm tweeter (titanium LTS dome), 2× 203 mm woofer (Cerametallic cone)
Crossover frequency550 / 3100 / 15000 Hz1630 Hz
Frequency — low35 Hz35 Hz
Frequency — high30000 Hz25000 Hz
Sensitivity89 dB98 dB
Impedance5 Ω8 Ω
Recommended amp50–500 W—
MAP (USD)$23,000 / pair$599 each
Where to buyCheck availability ↗Check on Amazon ↗
Brand websitedali-speakers.com ↗klipsch.com ↗
Product pageOpen product page ↗Open product page ↗

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.