TrueScaleAudio
Compare speakers at true scale
Pick two speakers and see them side by side at their real-world size.
Front view — side by side at true scale
Plan view — footprint at true scale
A shelf applies to bookshelf speakers only — one of these stands on the floor.
Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.
Performance — where each one sits in the catalog
| Bass reach | Treble reach | Sensitivity | Easy load | Cone area | |
|---|---|---|---|---|---|
| Rubicon 6 | 38 Hz | 34 kHz | 88.5 dB | 4 Ω | 450 cm² |
| Sopra N°3 | 33 Hz | 40 kHz | 91.5 dB | 8 Ω | 912 cm² |
| Median | 32 Hz | 30 kHz | 90 dB | 6 Ω | 654 cm² |
How to read this chart
Each axis spans the range the 648 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 600 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.
Dali Rubicon 6vsFocal Sopra N°3
The Focal Sopra N°3 stands 126.4 cm tall — about 27.4 cm more than the Dali Rubicon 6 at 99.0 cm. On footprint the Focal Sopra N°3 is the wider cabinet (35.5 cm versus 20.0 cm). At 91.5 dB against 88.5 dB, the Focal Sopra N°3 is the easier load to drive and plays louder from the same amplifier. The Focal Sopra N°3 reaches deeper in the bass, down to 33 Hz versus 38 Hz. Low frequencies come from a 165 mm cone on the Dali Rubicon 6 and a 210 mm cone on the Focal Sopra N°3. On price, the Focal Sopra N°3 sits higher — about $22,998 a pair against $4,999 for the Dali Rubicon 6.
| A | B | |
|---|---|---|
| Manufacturer | Dali | Focal |
| Model | Rubicon 6 | Sopra N°3 |
| HiFi ladder position | #127 of 648 floorstander | #507 of 648 floorstander |
| Height | 990 mm | 1264 mm |
| Width | 200 mm | 355 mm |
| Depth | 380 mm | 595 mm |
| Footprint | 760 cm² | 2112 cm² |
| Space taken | 75.2 L | 267 L |
| Weight | 20.2 kg | 70 kg |
| Enclosure | bass-reflex-rear | bass-reflex-down |
| Drivers | 1× 45 mm super-tweeter (ribbon), 1× 29 mm tweeter (soft textile dome), 2× 165 mm mid-bass (wood-fibre cone) | 1× 27 mm tweeter (pure beryllium inverted dome), 1× 165 mm midrange (W sandwich cone), 2× 210 mm woofer (W sandwich cone) |
| Crossover frequency | 800 / 2600 / 14000 Hz | 250 / 2200 Hz |
| Frequency — low | 38 Hz | 33 Hz |
| Frequency — high | 34000 Hz | 40000 Hz |
| Sensitivity | 88.5 dB | 91.5 dB |
| Impedance | 4 Ω | 8 Ω |
| Recommended amp | 40–200 W | 40–400 W |
| MAP (USD) | $4,999 / pair | $22,998 / pair |
| Where to buy | Check availability ↗ | Check availability ↗ |
| Brand website | dali-speakers.com ↗ | focal.com ↗ |
| Product page | Open product page ↗ | Open product page ↗ |
Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.
