TrueScaleAudio
Compare speakers at true scale
Pick two speakers and see them side by side at their real-world size.
Front view — side by side at true scale
Plan view — footprint at true scale
Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.
Performance — where each one sits in the catalog
No radar for this pair: one of the two is an active speaker and the other is not. They do share enough figures to draw something — but what is left compares a self-powered system against a cabinet that still needs an amplifier chosen for it, on three numbers, and a radar makes that look like a verdict. The size views above and the spec table below compare the pair on everything they do share.
Comparisons where this chart does work:
Dutch & Dutch 8cvsKlipsch RP-500M II
The Dutch & Dutch 8c stands 48.5 cm tall — about 14.1 cm more than the Klipsch RP-500M II at 34.4 cm. On footprint the Dutch & Dutch 8c is the wider cabinet (27.0 cm versus 17.1 cm). The Dutch & Dutch 8c reaches deeper in the bass, down to 30 Hz versus 50 Hz. Low frequencies come from a 200 mm cone on the Dutch & Dutch 8c and a 133 mm cone on the Klipsch RP-500M II. On price, the Dutch & Dutch 8c sits higher — about $13,400 a pair against $549 for the Klipsch RP-500M II.
| A | B | |
|---|---|---|
| Manufacturer | Dutch & Dutch | Klipsch |
| Model | 8c | RP-500M II |
| HiFi ladder position | #71 of 114 floorstander | #193 of 470 bookshelf |
| Height | 485 mm | 344 mm |
| Width | 270 mm | 171 mm |
| Depth | 380 mm | 270 mm |
| Footprint | 1026 cm² | 462 cm² |
| Space taken | 49.8 L | 15.9 L |
| Weight | 26 kg | 5.95 kg |
| Enclosure | sealed | bass-reflex-rear |
| Drivers | 1× 25 mm tweeter (aluminium-magnesium alloy dome), 1× 200 mm midrange (aluminium cone), 2× 200 mm woofer (aluminium cone) | 1× 25 mm tweeter (titanium LTS dome), 1× 133 mm mid-bass (Cerametallic cone) |
| Crossover frequency | 100 / 1250 Hz | 1530 Hz |
| Frequency — low | 30 Hz | 50 Hz |
| Frequency — high | 20000 Hz | 25000 Hz |
| Sensitivity | — | 92 dB |
| Impedance | — | 8 Ω |
| Recommended amp | — | — |
| MAP (USD) | $13,400 / pair | $549 / pair |
| Where to buy | Check availability ↗ | Check on Amazon ↗ |
| Brand website | dutchdutch.com ↗ | klipsch.com ↗ |
| Product page | Open product page ↗ | Open product page ↗ |
Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.

