TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A
Speaker B
References

Front view — side by side at true scale

ADutch & Dutch 8cBNeumann KH 120 II
Dutch & Dutch 8c front view
Neumann KH 120 II front view

Click either cabinet to swap A ↔ B · Reference height: 485 mm (48.5 cm) · 1 mm = 1.15 px

Plan view — footprint at true scale

front wall
A1026 cm²270 mm380 mm
B413 cm²182 mm227 mm
0 mm100 mm30 mm
150 mm500 mm300 mm

Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.

Performance — where each one sits in the catalog

BassTrebleCone area
Bass reachTreble reachCone area
8c30 Hz20 kHz947 cm²
KH 120 II44 Hz21 kHz138 cm²
Median39 Hz24 kHz332 cm²
How to read this chart

Each axis spans the range the 114 studio monitors in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 96 active studio monitors — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe. Not shown: Sensitivity, Easy load — neither maker publishes a figure. Active speakers quote no sensitivity and no impedance, because with the amplifier inside both describe the electronics rather than the cabinet.

Dutch & Dutch 8cvsNeumann KH 120 II

The Dutch & Dutch 8c stands 48.5 cm tall — about 19.8 cm more than the Neumann KH 120 II at 28.7 cm. On footprint the Dutch & Dutch 8c is the wider cabinet (27.0 cm versus 18.2 cm). The Dutch & Dutch 8c reaches deeper in the bass, down to 30 Hz versus 44 Hz. Low frequencies come from a 200 mm cone on the Dutch & Dutch 8c and a 130 mm cone on the Neumann KH 120 II. On price, the Dutch & Dutch 8c sits higher — about $13,400 a pair against $949 for the Neumann KH 120 II.

Specifications

AB
ManufacturerDutch & DutchNeumann
Model8cKH 120 II
HiFi ladder position#71 of 114 floorstander#19 of 114 floorstander
Height485 mm287 mm
Width270 mm182 mm
Depth380 mm227 mm
Footprint1026 cm²413 cm²
Space taken49.8 L11.9 L
Weight26 kg5.4 kg
Enclosuresealedbass-reflex-front
Drivers1× 25 mm tweeter (aluminium-magnesium alloy dome), 1× 200 mm midrange (aluminium cone), 2× 200 mm woofer (aluminium cone)1× 25 mm tweeter (alloy fabric dome), 1× 130 mm woofer (long-throw composite cone)
Crossover frequency100 / 1250 Hz1700 Hz
Frequency — low30 Hz44 Hz
Frequency — high20000 Hz21000 Hz
Sensitivity——
Impedance——
Recommended amp——
MAP (USD)$13,400 / pair$949 each
Where to buyCheck availability ↗Check on Amazon ↗
Brand websitedutchdutch.com ↗neumann.com ↗
Product pageOpen product page ↗Open product page ↗

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.