TrueScaleAudio
Compare speakers at true scale
Pick two speakers and see them side by side at their real-world size.
Front view — side by side at true scale
Plan view — footprint at true scale
A shelf applies to bookshelf speakers only — one of these stands on the floor.
Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.
Performance — where each one sits in the catalog
| Bass reach | Treble reach | Sensitivity | Easy load | Cone area | |
|---|---|---|---|---|---|
| Confidence 50 | 35 Hz | 22 kHz | 87 dB | 4 Ω | 869 cm² |
| Jubilee | 18 Hz | 20 kHz | 107 dB | 8 Ω | 1466 cm² |
| Median | 32 Hz | 30 kHz | 90 dB | 6 Ω | 654 cm² |
How to read this chart
Each axis spans the range the 648 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 600 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.
Dynaudio Confidence 50vsKlipsch Jubilee
The Klipsch Jubilee stands 176.5 cm tall — about 20.8 cm more than the Dynaudio Confidence 50 at 155.7 cm. On footprint the Klipsch Jubilee is the wider cabinet (128.6 cm versus 36.4 cm). At 107 dB against 87 dB, the Klipsch Jubilee is the easier load to drive and plays louder from the same amplifier. The Klipsch Jubilee reaches deeper in the bass, down to 18 Hz versus 35 Hz. Low frequencies come from a 180 mm cone on the Dynaudio Confidence 50 and a 305 mm cone on the Klipsch Jubilee. On price, the Klipsch Jubilee sits higher — about $35,000 a pair against $30,000 for the Dynaudio Confidence 50.
| A | B | |
|---|---|---|
| Manufacturer | Dynaudio | Klipsch |
| Model | Confidence 50 | Jubilee |
| HiFi ladder position | #597 of 648 floorstander | #626 of 648 floorstander |
| Height | 1557 mm | 1765 mm |
| Width | 364 mm | 1286 mm |
| Depth | 424 mm | 762 mm |
| Footprint | 1543 cm² | 9799 cm² |
| Space taken | 240.3 L | 1729.6 L |
| Weight | 49.6 kg | 185 kg |
| Enclosure | bass-reflex-down | bass-reflex-front |
| Drivers | 1× 28 mm tweeter (Esotar 3 soft dome with DDC Lens), 2× 150 mm midrange (MSP with Horizon Surround), 2× 180 mm woofer (NeoTec MSP cone) | 1× 25 mm tweeter (K-693 titanium compression diaphragm), 2× 305 mm woofer (K-283 fiber-composite cone) |
| Crossover frequency | 200 / 2860 Hz | 340 Hz |
| Frequency — low | 35 Hz | 18 Hz |
| Frequency — high | 22000 Hz | 20000 Hz |
| Sensitivity | 87 dB | 107 dB |
| Impedance | 4 Ω | 8 Ω |
| Recommended amp | — | — |
| MAP (USD) | $30,000 / pair | $35,000 / pair |
| Where to buy | Check availability ↗ | Check availability ↗ |
| Brand website | dynaudio.com ↗ | klipsch.com ↗ |
| Product page | Open product page ↗ | Open product page ↗ |
Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.

