Klipsch · Heritage · Floorstander

Jubilee

Product description
The final project of founder Paul W. Klipsch — a two-piece, fully horn-loaded Heritage flagship with a titanium HF driver on a phase plug over twin 12-inch woofers in a horn-loaded bass cabinet. It needs an external active DSP crossover and, at 107 dB sensitivity and 125 dB max SPL, delivers cinema-scale dynamics from modest power in a large room.

Performance — where it sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
Jubilee18 Hz20 kHz107 dB8 Ω1466 cm²
Median32 Hz30 kHz90 dB6 Ω654 cm²
How to read this chart

Each axis spans the range the 648 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of this speaker's own class, the 600 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

Units
TypeFloorstander
HiFi ladder position#626 of 648 floorstander
PowerPassive
Height1765 mm
Width1286 mm
Depth762 mm
Footprint9799 cm²
Space taken1729.6 L
Weight185 kg
EnclosureBass reflex, front port
Drivers1× 25 mm tweeter (K-693 titanium compression diaphragm), 2× 305 mm woofer (K-283 fiber-composite cone)
Crossover frequency340 Hz
Frequency response18–20000 Hz (±3 dB)
Sensitivity107 dB
Impedance8 Ω (min 3.2 Ω)
Power handling300 W
MAP (USD)$35,000 / pair
Where to buyCheck availability ↗
Manufacturerklipsch.com ↗
Product pageOpen product page ↗

Suggested TrueScale comparisons

Tap any speaker to see it beside this one at true, real-world scale.