TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A

Stands apply to bookshelves only

Speaker B

Stands apply to bookshelves only

References

Front view — side by side at true scale

ADynaudio Confidence 50BSonus Faber Stradivari G2
Dynaudio Confidence 50 front view
Sonus Faber Stradivari G2 front view

Click either cabinet to swap A ↔ B · Reference height: 1557 mm (155.7 cm) · 1 mm = 0.36 px

Plan view — footprint at true scale

front wall
A1543 cm²364 mm424 mm
B3026 cm²707 mm428 mm
0 mm100 mm30 mm

A shelf applies to bookshelf speakers only — one of these stands on the floor.

Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.

Performance — where each one sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
Confidence 5035 Hz22 kHz87 dB4 Ω869 cm²
Stradivari G225 Hz35 kHz92 dB4 Ω1245 cm²
Median32 Hz30 kHz90 dB6 Ω654 cm²
How to read this chart

Each axis spans the range the 648 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 600 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

Dynaudio Confidence 50vsSonus Faber Stradivari G2

The Dynaudio Confidence 50 stands 155.7 cm tall — about 18.3 cm more than the Sonus Faber Stradivari G2 at 137.4 cm. On footprint the Sonus Faber Stradivari G2 is the wider cabinet (70.7 cm versus 36.4 cm). At 92 dB against 87 dB, the Sonus Faber Stradivari G2 is the easier load to drive and plays louder from the same amplifier. The Sonus Faber Stradivari G2 reaches deeper in the bass, down to 25 Hz versus 35 Hz. Low frequencies come from a 180 mm cone on the Dynaudio Confidence 50 and a 260 mm cone on the Sonus Faber Stradivari G2. On price, the Sonus Faber Stradivari G2 sits higher — about $50,000 a pair against $30,000 for the Dynaudio Confidence 50.

Specifications

AB
ManufacturerDynaudioSonus Faber
ModelConfidence 50Stradivari G2
HiFi ladder position#597 of 648 floorstander#566 of 648 floorstander
Height1557 mm1374 mm
Width364 mm707 mm
Depth424 mm428 mm
Footprint1543 cm²3026 cm²
Space taken240.3 L415.8 L
Weight49.6 kg81.5 kg
Enclosurebass-reflex-downbass-reflex-down
Drivers1× 28 mm tweeter (Esotar 3 soft dome with DDC Lens), 2× 150 mm midrange (MSP with Horizon Surround), 2× 180 mm woofer (NeoTec MSP cone)1× 28 mm tweeter (H28 XTR soft dome with DAD), 1× 150 mm midrange (paper cone), 2× 260 mm woofer (paper cone)
Crossover frequency200 / 2860 Hz160 / 220 / 2200 Hz
Frequency — low35 Hz25 Hz
Frequency — high22000 Hz35000 Hz
Sensitivity87 dB92 dB
Impedance4 Ω4 Ω
Recommended amp—100–600 W
MAP (USD)$30,000 / pair$50,000 / pair
Where to buyCheck availability ↗Check availability ↗
Brand websitedynaudio.com ↗sonusfaber.com ↗
Product pageOpen product page ↗Open product page ↗

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.