TrueScaleAudio
Compare speakers at true scale
Pick two speakers and see them side by side at their real-world size.
Front view — side by side at true scale
Plan view — footprint at true scale
A shelf applies to bookshelf speakers only — one of these stands on the floor.
Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.
Performance — where each one sits in the catalog
| Bass reach | Treble reach | Sensitivity | Easy load | Cone area | |
|---|---|---|---|---|---|
| Sopra N°3 | 33 Hz | 40 kHz | 91.5 dB | 8 Ω | 912 cm² |
| Jubilee | 18 Hz | 20 kHz | 107 dB | 8 Ω | 1466 cm² |
| Median | 32 Hz | 30 kHz | 90 dB | 6 Ω | 654 cm² |
How to read this chart
Each axis spans the range the 648 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 600 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.
Focal Sopra N°3vsKlipsch Jubilee
The Klipsch Jubilee stands 176.5 cm tall — about 50.1 cm more than the Focal Sopra N°3 at 126.4 cm. On footprint the Klipsch Jubilee is the wider cabinet (128.6 cm versus 35.5 cm). At 107 dB against 91.5 dB, the Klipsch Jubilee is the easier load to drive and plays louder from the same amplifier. The Klipsch Jubilee reaches deeper in the bass, down to 18 Hz versus 33 Hz. Low frequencies come from a 210 mm cone on the Focal Sopra N°3 and a 305 mm cone on the Klipsch Jubilee. On price, the Klipsch Jubilee sits higher — about $35,000 a pair against $22,998 for the Focal Sopra N°3.
| A | B | |
|---|---|---|
| Manufacturer | Focal | Klipsch |
| Model | Sopra N°3 | Jubilee |
| HiFi ladder position | #507 of 648 floorstander | #626 of 648 floorstander |
| Height | 1264 mm | 1765 mm |
| Width | 355 mm | 1286 mm |
| Depth | 595 mm | 762 mm |
| Footprint | 2112 cm² | 9799 cm² |
| Space taken | 267 L | 1729.6 L |
| Weight | 70 kg | 185 kg |
| Enclosure | bass-reflex-down | bass-reflex-front |
| Drivers | 1× 27 mm tweeter (pure beryllium inverted dome), 1× 165 mm midrange (W sandwich cone), 2× 210 mm woofer (W sandwich cone) | 1× 25 mm tweeter (K-693 titanium compression diaphragm), 2× 305 mm woofer (K-283 fiber-composite cone) |
| Crossover frequency | 250 / 2200 Hz | 340 Hz |
| Frequency — low | 33 Hz | 18 Hz |
| Frequency — high | 40000 Hz | 20000 Hz |
| Sensitivity | 91.5 dB | 107 dB |
| Impedance | 8 Ω | 8 Ω |
| Recommended amp | 40–400 W | — |
| MAP (USD) | $22,998 / pair | $35,000 / pair |
| Where to buy | Check availability ↗ | Check availability ↗ |
| Brand website | focal.com ↗ | klipsch.com ↗ |
| Product page | Open product page ↗ | Open product page ↗ |
Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.

