TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A
Speaker B
References

Front view — side by side at true scale

AGenelec 8341ABNeumann KH 80 DSP
Genelec 8341A front view
Neumann KH 80 DSP front view

Click either cabinet to swap A ↔ B · Reference height: 370 mm (37.0 cm) · 1 mm = 1.51 px

Plan view — footprint at true scale

front wall
A576 cm²237 mm243 mm
B299 cm²154 mm194 mm
0 mm100 mm30 mm
150 mm500 mm300 mm

Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.

Performance — where each one sits in the catalog

BassTrebleCone area
Bass reachTreble reachCone area
8341A38 Hz37 kHz520 cm²
KH 80 DSP57 Hz21 kHz83 cm²
Median39 Hz24 kHz332 cm²
How to read this chart

Each axis spans the range the 114 studio monitors in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 96 active studio monitors — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe. Not shown: Sensitivity, Easy load — neither maker publishes a figure. Active speakers quote no sensitivity and no impedance, because with the amplifier inside both describe the electronics rather than the cabinet.

Genelec 8341AvsNeumann KH 80 DSP

The Genelec 8341A stands 37.0 cm tall — about 13.7 cm more than the Neumann KH 80 DSP at 23.3 cm. On footprint the Genelec 8341A is the wider cabinet (23.7 cm versus 15.4 cm). The Genelec 8341A reaches deeper in the bass, down to 38 Hz versus 57 Hz. Low frequencies come from a 170 mm cone on the Genelec 8341A and a 100 mm cone on the Neumann KH 80 DSP. On price, the Genelec 8341A sits higher — about $3,675 a pair against $599 for the Neumann KH 80 DSP.

Specifications

AB
ManufacturerGenelecNeumann
Model8341AKH 80 DSP
HiFi ladder position#51 of 114 floorstander#2 of 114 floorstander
Height370 mm233 mm
Width237 mm154 mm
Depth243 mm194 mm
Footprint576 cm²299 cm²
Space taken21.3 L7 L
Weight9.8 kg3.5 kg
Enclosurebass-reflex-rearbass-reflex-front
Drivers1× 19 mm tweeter (metal dome), 1× 90 mm midrange (cone), 2× 170 mm woofer (racetrack cone)1× 25 mm tweeter (alloy fabric dome), 1× 100 mm woofer (composite sandwich cone)
Crossover frequency500 / 3000 Hz1800 Hz
Frequency — low38 Hz57 Hz
Frequency — high37000 Hz21000 Hz
Sensitivity——
Impedance——
Recommended amp——
MAP (USD)$3,675 each$599 each
Where to buyCheck availability ↗Check on Amazon ↗
Brand websitegenelec.com ↗neumann.com ↗
Product pageOpen product page ↗Open product page ↗

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.