TrueScaleAudio
Compare speakers at true scale
Pick two speakers and see them side by side at their real-world size.
Front view — side by side at true scale
Plan view — footprint at true scale
Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.
Performance — where each one sits in the catalog
| Bass reach | Treble reach | Sensitivity | Easy load | Cone area | |
|---|---|---|---|---|---|
| LS50 Meta | 79 Hz | 28 kHz | 85 dB | 8 Ω | 138 cm² |
| kO-R1 | 51 Hz | 20 kHz | 97.5 dB | 8 Ω | 736 cm² |
| Median | 45 Hz | 25 kHz | 87 dB | 6 Ω | 219 cm² |
How to read this chart
Each axis spans the range the 470 bookshelves in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 385 passive bookshelves — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.
KEF LS50 MetavsKlipsch kO-R1
The Klipsch kO-R1 stands 71.4 cm tall — about 41.2 cm more than the KEF LS50 Meta at 30.2 cm. On footprint the Klipsch kO-R1 is the wider cabinet (42.0 cm versus 19.9 cm). At 97.5 dB against 85 dB, the Klipsch kO-R1 is the easier load to drive and plays louder from the same amplifier. The Klipsch kO-R1 reaches deeper in the bass, down to 51 Hz versus 79 Hz. Low frequencies come from a 130 mm cone on the KEF LS50 Meta and a 305 mm cone on the Klipsch kO-R1. On price, the Klipsch kO-R1 sits higher — about $8,498 a pair against $1,599 for the KEF LS50 Meta.
| A | B | |
|---|---|---|
| Manufacturer | KEF | Klipsch |
| Model | LS50 Meta | kO-R1 |
| HiFi ladder position | #100 of 470 bookshelf | #461 of 470 bookshelf |
| Height | 302 mm | 714 mm |
| Width | 199 mm | 420 mm |
| Depth | 281 mm | 330 mm |
| Footprint | 559 cm² | 1386 cm² |
| Space taken | 16.9 L | 99 L |
| Weight | 7.8 kg | 23.6 kg |
| Enclosure | bass-reflex-rear | bass-reflex-front |
| Drivers | 1× 25 mm tweeter (MAT aluminium dome), 1× 130 mm mid-bass (aluminium cone) | 1× 25 mm tweeter (K-706 titanium compression diaphragm), 1× 305 mm woofer (K-28-E paper cone) |
| Crossover frequency | 2100 Hz | 970 Hz |
| Frequency — low | 79 Hz | 51 Hz |
| Frequency — high | 28000 Hz | 20000 Hz |
| Sensitivity | 85 dB | 97.5 dB |
| Impedance | 8 Ω | 8 Ω |
| Recommended amp | 40–100 W | — |
| MAP (USD) | $1,599 / pair | $8,498 / pair |
| Where to buy | Check on Amazon ↗ | Check availability ↗ |
| Brand website | international.kef.com ↗ | klipsch.com ↗ |
| Product page | Open product page ↗ | Open product page ↗ |
Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.

