TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A
Speaker B
References

Front view — side by side at true scale

AKEF Q1 MetaBKlipsch kO-R1
KEF Q1 Meta front view
Klipsch kO-R1 front view

Click either cabinet to swap A ↔ B · Reference height: 714 mm (71.4 cm) · 1 mm = 0.78 px

Plan view — footprint at true scale

front wall
A499 cm²180 mm277 mm
B1386 cm²420 mm330 mm
0 mm100 mm30 mm
150 mm500 mm300 mm

Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.

Performance — where each one sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
Q1 Meta51 Hz20 kHz86 dB4 Ω138 cm²
kO-R151 Hz20 kHz97.5 dB8 Ω736 cm²
Median45 Hz25 kHz87 dB6 Ω219 cm²
How to read this chart

Each axis spans the range the 470 bookshelves in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 385 passive bookshelves — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

KEF Q1 MetavsKlipsch kO-R1

The Klipsch kO-R1 stands 71.4 cm tall — about 41.2 cm more than the KEF Q1 Meta at 30.2 cm. On footprint the Klipsch kO-R1 is the wider cabinet (42.0 cm versus 18.0 cm). At 97.5 dB against 86 dB, the Klipsch kO-R1 is the easier load to drive and plays louder from the same amplifier. Low frequencies come from a 130 mm cone on the KEF Q1 Meta and a 305 mm cone on the Klipsch kO-R1. On price, the Klipsch kO-R1 sits higher — about $8,498 a pair against $749 for the KEF Q1 Meta.

Specifications

AB
ManufacturerKEFKlipsch
ModelQ1 MetakO-R1
HiFi ladder position#101 of 470 bookshelf#461 of 470 bookshelf
Height302 mm714 mm
Width180 mm420 mm
Depth277 mm330 mm
Footprint499 cm²1386 cm²
Space taken15.1 L99 L
Weight6.1 kg23.6 kg
Enclosurebass-reflex-rearbass-reflex-front
Drivers1× 25 mm tweeter (MAT aluminium dome), 1× 130 mm mid-bass (aluminium cone)1× 25 mm tweeter (K-706 titanium compression diaphragm), 1× 305 mm woofer (K-28-E paper cone)
Crossover frequency2100 Hz970 Hz
Frequency — low51 Hz51 Hz
Frequency — high20000 Hz20000 Hz
Sensitivity86 dB97.5 dB
Impedance4 Ω8 Ω
Recommended amp10–150 W—
MAP (USD)$749 / pair$8,498 / pair
Where to buyCheck on Amazon ↗Check availability ↗
Brand websiteinternational.kef.com ↗klipsch.com ↗
Product pageOpen product page ↗Open product page ↗

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.