TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A
Speaker B
References

Front view — side by side at true scale

AKEF Q1 MetaBMonitor Audio Silver 100
KEF Q1 Meta front view
Monitor Audio Silver 100 front view

Click either cabinet to swap A ↔ B · Reference height: 375 mm (37.5 cm) · 1 mm = 1.49 px

Plan view — footprint at true scale

front wall
A499 cm²180 mm277 mm
B764 cm²230 mm332 mm
0 mm100 mm30 mm
150 mm500 mm300 mm

Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.

Performance — where each one sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
Q1 Meta51 Hz20 kHz86 dB4 Ω138 cm²
Silver 10035 Hz35 kHz87.5 dB8 Ω329 cm²
Median45 Hz25 kHz87 dB6 Ω219 cm²
How to read this chart

Each axis spans the range the 470 bookshelves in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 385 passive bookshelves — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

KEF Q1 MetavsMonitor Audio Silver 100

The Monitor Audio Silver 100 stands 37.5 cm tall — about 7.3 cm more than the KEF Q1 Meta at 30.2 cm. On footprint the Monitor Audio Silver 100 is the wider cabinet (23.0 cm versus 18.0 cm). At 87.5 dB against 86 dB, the Monitor Audio Silver 100 is the easier load to drive and plays louder from the same amplifier. The Monitor Audio Silver 100 reaches deeper in the bass, down to 35 Hz versus 51 Hz. Low frequencies come from a 130 mm cone on the KEF Q1 Meta and a 203 mm cone on the Monitor Audio Silver 100. On price, the Monitor Audio Silver 100 sits higher — about $1,649 a pair against $749 for the KEF Q1 Meta.

Specifications

AB
ManufacturerKEFMonitor Audio
ModelQ1 MetaSilver 100 7G
HiFi ladder position#101 of 470 bookshelf#262 of 470 bookshelf
Height302 mm375 mm
Width180 mm230 mm
Depth277 mm332 mm
Footprint499 cm²764 cm²
Space taken15.1 L28.6 L
Weight6.1 kg9.4 kg
Enclosurebass-reflex-rearbass-reflex-rear
Drivers1× 25 mm tweeter (MAT aluminium dome), 1× 130 mm mid-bass (aluminium cone)1× 25 mm tweeter (C-CAM Gold Dome), 1× 203 mm mid-bass (C-CAM RST II)
Crossover frequency2100 Hz2300 Hz
Frequency — low51 Hz35 Hz
Frequency — high20000 Hz35000 Hz
Sensitivity86 dB87.5 dB
Impedance4 Ω8 Ω
Recommended amp10–150 W40–120 W
MAP (USD)$749 / pair$1,649 / pair
Where to buyCheck on Amazon ↗Check on Amazon ↗
Brand websiteinternational.kef.com ↗monitoraudio.com ↗
Product pageOpen product page ↗Open product page ↗

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.