TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A
Speaker B
References

Front view — side by side at true scale

AKEF Q3 MetaBWharfedale Linton
KEF Q3 Meta front view
Wharfedale Linton front view

Click either cabinet to swap A ↔ B · Reference height: 565 mm (56.5 cm) · 1 mm = 0.99 px

Plan view — footprint at true scale

front wall
A641 cm²210 mm305 mm
B1080 cm²300 mm360 mm
0 mm100 mm30 mm
150 mm500 mm300 mm

Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.

Performance — where each one sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
Q3 Meta49 Hz20 kHz87 dB4 Ω219 cm²
Linton40 Hz20 kHz90 dB6 Ω462 cm²
Median45 Hz25 kHz87 dB6 Ω219 cm²
How to read this chart

Each axis spans the range the 470 bookshelves in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 385 passive bookshelves — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

KEF Q3 MetavsWharfedale Linton

The Wharfedale Linton stands 56.5 cm tall — about 20.8 cm more than the KEF Q3 Meta at 35.7 cm. On footprint the Wharfedale Linton is the wider cabinet (30.0 cm versus 21.0 cm). At 90 dB against 87 dB, the Wharfedale Linton is the easier load to drive and plays louder from the same amplifier. The Wharfedale Linton reaches deeper in the bass, down to 40 Hz versus 49 Hz. Low frequencies come from a 165 mm cone on the KEF Q3 Meta and a 200 mm cone on the Wharfedale Linton. On price, the Wharfedale Linton sits higher — about $1,499 a pair against $999 for the KEF Q3 Meta.

Specifications

AB
ManufacturerKEFWharfedale
ModelQ3 MetaLinton 85th Anniversary
HiFi ladder position#226 of 470 bookshelf#429 of 470 bookshelf
Height357 mm565 mm
Width210 mm300 mm
Depth305 mm360 mm
Footprint641 cm²1080 cm²
Space taken22.9 L61 L
Weight8.2 kg18.4 kg
Enclosurebass-reflex-rearbass-reflex-rear
Drivers1× 25 mm tweeter (MAT aluminium dome), 1× 165 mm mid-bass (aluminium cone)1× 25 mm tweeter (soft dome), 1× 135 mm midrange (woven Kevlar cone), 1× 200 mm woofer (woven Kevlar cone)
Crossover frequency2000 Hz630 / 2400 Hz
Frequency — low49 Hz40 Hz
Frequency — high20000 Hz20000 Hz
Sensitivity87 dB90 dB
Impedance4 Ω6 Ω
Recommended amp15–150 W25–200 W
MAP (USD)$999 / pair$1,499 / pair
Where to buyCheck on Amazon ↗Check on Amazon ↗
Brand websiteinternational.kef.com ↗wharfedale.co.uk ↗
Product pageOpen product page ↗Open product page ↗

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.