TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A

Stands apply to bookshelves only

Speaker B

Stands apply to bookshelves only

References

Front view — side by side at true scale

AKEF R5 MetaBSonus Faber Stradivari G2
KEF R5 Meta front view
Sonus Faber Stradivari G2 front view

Click either cabinet to swap A ↔ B · Reference height: 1374 mm (137.4 cm) · 1 mm = 0.41 px

Plan view — footprint at true scale

front wall
A925 cm²269 mm344 mm
B3026 cm²707 mm428 mm
0 mm100 mm30 mm

A shelf applies to bookshelf speakers only — one of these stands on the floor.

Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.

Performance — where each one sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
R5 Meta52 Hz28 kHz87 dB4 Ω393 cm²
Stradivari G225 Hz35 kHz92 dB4 Ω1245 cm²
Median32 Hz30 kHz90 dB6 Ω654 cm²
How to read this chart

Each axis spans the range the 648 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 600 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

KEF R5 MetavsSonus Faber Stradivari G2

The Sonus Faber Stradivari G2 stands 137.4 cm tall — about 30.2 cm more than the KEF R5 Meta at 107.2 cm. On footprint the Sonus Faber Stradivari G2 is the wider cabinet (70.7 cm versus 26.9 cm). At 92 dB against 87 dB, the Sonus Faber Stradivari G2 is the easier load to drive and plays louder from the same amplifier. The Sonus Faber Stradivari G2 reaches deeper in the bass, down to 25 Hz versus 52 Hz. Low frequencies come from a 130 mm cone on the KEF R5 Meta and a 260 mm cone on the Sonus Faber Stradivari G2. On price, the Sonus Faber Stradivari G2 sits higher — about $50,000 a pair against $5,999 for the KEF R5 Meta.

Specifications

AB
ManufacturerKEFSonus Faber
ModelR5 MetaStradivari G2
HiFi ladder position#262 of 648 floorstander#566 of 648 floorstander
Height1072 mm1374 mm
Width269 mm707 mm
Depth344 mm428 mm
Footprint925 cm²3026 cm²
Space taken99.2 L415.8 L
Weight24.5 kg81.5 kg
Enclosurebass-reflex-rearbass-reflex-down
Drivers1× 25 mm tweeter (MAT aluminium dome), 1× 125 mm midrange (aluminium cone), 2× 130 mm woofer (hybrid aluminium cone)1× 28 mm tweeter (H28 XTR soft dome with DAD), 1× 150 mm midrange (paper cone), 2× 260 mm woofer (paper cone)
Crossover frequency400 / 2700 Hz160 / 220 / 2200 Hz
Frequency — low52 Hz25 Hz
Frequency — high28000 Hz35000 Hz
Sensitivity87 dB92 dB
Impedance4 Ω4 Ω
Recommended amp15–200 W100–600 W
MAP (USD)$5,999 / pair$50,000 / pair
Where to buyCheck on Amazon ↗Check availability ↗
Brand websiteinternational.kef.com ↗sonusfaber.com ↗
Product pageOpen product page ↗Open product page ↗

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.