TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A

Stands apply to bookshelves only

Speaker B

Stands apply to bookshelves only

References

Front view — side by side at true scale

AKEF Reference 5 MetaBKlipsch Klipschorn AK6
KEF Reference 5 Meta front view
Klipsch Klipschorn AK6 front view

Click either cabinet to swap A ↔ B · Reference height: 1402 mm (140.2 cm) · 1 mm = 0.40 px

Plan view — footprint at true scale

front wall
A1508 cm²323 mm467 mm
B5701 cm²794 mm718 mm
0 mm100 mm30 mm

A shelf applies to bookshelf speakers only — one of these stands on the floor.

Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.

Performance — where each one sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
Reference 5 Meta40 Hz35 kHz88 dB4 Ω983 cm²
Klipschorn AK633 Hz20 kHz105 dB8 Ω1165 cm²
Median32 Hz30 kHz90 dB6 Ω654 cm²
How to read this chart

Each axis spans the range the 648 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 600 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

KEF Reference 5 MetavsKlipsch Klipschorn AK6

The KEF Reference 5 Meta stands 140.2 cm tall — about 5.6 cm more than the Klipsch Klipschorn AK6 at 134.6 cm. On footprint the Klipsch Klipschorn AK6 is the wider cabinet (79.4 cm versus 32.3 cm). At 105 dB against 88 dB, the Klipsch Klipschorn AK6 is the easier load to drive and plays louder from the same amplifier. The Klipsch Klipschorn AK6 reaches deeper in the bass, down to 33 Hz versus 40 Hz. Low frequencies come from a 165 mm cone on the KEF Reference 5 Meta and a 381 mm cone on the Klipsch Klipschorn AK6. On price, the KEF Reference 5 Meta sits higher — about $19,998 a pair against $14,998 for the Klipsch Klipschorn AK6.

Specifications

AB
ManufacturerKEFKlipsch
ModelReference 5 MetaKlipschorn AK6
HiFi ladder position#574 of 648 floorstander#553 of 648 floorstander
Height1402 mm1346 mm
Width323 mm794 mm
Depth467 mm718 mm
Footprint1508 cm²5701 cm²
Space taken211.5 L767.3 L
Weight60.2 kg100 kg
Enclosurebass-reflex-rear—
Drivers1× 25 mm tweeter (MAT aluminium dome), 1× 125 mm midrange (aluminium cone), 4× 165 mm woofer (aluminium cone)1× 25 mm tweeter (K-771-T polyimide compression diaphragm), 1× 51 mm midrange (K-55-X phenolic compression diaphragm), 1× 381 mm woofer (K-33-E fiber-composite cone)
Crossover frequency450 / 2100 Hz450 / 4500 Hz
Frequency — low40 Hz33 Hz
Frequency — high35000 Hz20000 Hz
Sensitivity88 dB105 dB
Impedance4 Ω8 Ω
Recommended amp50–400 W—
MAP (USD)$19,998 / pair$14,998 / pair
Where to buyCheck availability ↗Check availability ↗
Brand websiteinternational.kef.com ↗klipsch.com ↗
Product pageOpen product page ↗Open product page ↗

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.