TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A

Stands apply to bookshelves only

Speaker B

Stands apply to bookshelves only

References

Front view — side by side at true scale

AKEF Reference 5 MetaBSonus Faber Stradivari G2
KEF Reference 5 Meta front view
Sonus Faber Stradivari G2 front view

Click either cabinet to swap A ↔ B · Reference height: 1402 mm (140.2 cm) · 1 mm = 0.40 px

Plan view — footprint at true scale

front wall
A1508 cm²323 mm467 mm
B3026 cm²707 mm428 mm
0 mm100 mm30 mm

A shelf applies to bookshelf speakers only — one of these stands on the floor.

Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.

Performance — where each one sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
Reference 5 Meta40 Hz35 kHz88 dB4 Ω983 cm²
Stradivari G225 Hz35 kHz92 dB4 Ω1245 cm²
Median32 Hz30 kHz90 dB6 Ω654 cm²
How to read this chart

Each axis spans the range the 648 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 600 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

KEF Reference 5 MetavsSonus Faber Stradivari G2

The KEF Reference 5 Meta stands 140.2 cm tall — about 2.8 cm more than the Sonus Faber Stradivari G2 at 137.4 cm. On footprint the Sonus Faber Stradivari G2 is the wider cabinet (70.7 cm versus 32.3 cm). At 92 dB against 88 dB, the Sonus Faber Stradivari G2 is the easier load to drive and plays louder from the same amplifier. The Sonus Faber Stradivari G2 reaches deeper in the bass, down to 25 Hz versus 40 Hz. Low frequencies come from a 165 mm cone on the KEF Reference 5 Meta and a 260 mm cone on the Sonus Faber Stradivari G2. On price, the Sonus Faber Stradivari G2 sits higher — about $50,000 a pair against $19,998 for the KEF Reference 5 Meta.

Specifications

AB
ManufacturerKEFSonus Faber
ModelReference 5 MetaStradivari G2
HiFi ladder position#574 of 648 floorstander#566 of 648 floorstander
Height1402 mm1374 mm
Width323 mm707 mm
Depth467 mm428 mm
Footprint1508 cm²3026 cm²
Space taken211.5 L415.8 L
Weight60.2 kg81.5 kg
Enclosurebass-reflex-rearbass-reflex-down
Drivers1× 25 mm tweeter (MAT aluminium dome), 1× 125 mm midrange (aluminium cone), 4× 165 mm woofer (aluminium cone)1× 28 mm tweeter (H28 XTR soft dome with DAD), 1× 150 mm midrange (paper cone), 2× 260 mm woofer (paper cone)
Crossover frequency450 / 2100 Hz160 / 220 / 2200 Hz
Frequency — low40 Hz25 Hz
Frequency — high35000 Hz35000 Hz
Sensitivity88 dB92 dB
Impedance4 Ω4 Ω
Recommended amp50–400 W100–600 W
MAP (USD)$19,998 / pair$50,000 / pair
Where to buyCheck availability ↗Check availability ↗
Brand websiteinternational.kef.com ↗sonusfaber.com ↗
Product pageOpen product page ↗Open product page ↗

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.