TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A

Stands apply to bookshelves only

Speaker B

Stands apply to bookshelves only

References

Front view — side by side at true scale

AKlipsch Klipschorn AK6BPolk Legend L800
Klipsch Klipschorn AK6 front view
Polk Legend L800 front view

Click either cabinet to swap A ↔ B · Reference height: 1346 mm (134.6 cm) · 1 mm = 0.42 px

Plan view — footprint at true scale

front wall
A5701 cm²794 mm718 mm
B2033 cm²461 mm441 mm
0 mm100 mm30 mm

A shelf applies to bookshelf speakers only — one of these stands on the floor.

Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.

Performance — where each one sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
Klipschorn AK633 Hz20 kHz105 dB8 Ω1165 cm²
Legend L80032 Hz38 kHz87 dB4 Ω1301 cm²
Median32 Hz30 kHz90 dB6 Ω654 cm²
How to read this chart

Each axis spans the range the 648 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 600 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

Klipsch Klipschorn AK6vsPolk Legend L800

The Klipsch Klipschorn AK6 stands 134.6 cm tall — about 11.1 cm more than the Polk Legend L800 at 123.5 cm. On footprint the Klipsch Klipschorn AK6 is the wider cabinet (79.4 cm versus 46.1 cm). At 105 dB against 87 dB, the Klipsch Klipschorn AK6 is the easier load to drive and plays louder from the same amplifier. Low frequencies come from a 381 mm cone on the Klipsch Klipschorn AK6 and a 254 mm cone on the Polk Legend L800. On price, the Klipsch Klipschorn AK6 sits higher — about $14,998 a pair against $5,998 for the Polk Legend L800.

Specifications

AB
ManufacturerKlipschPolk
ModelKlipschorn AK6Legend L800
HiFi ladder position#553 of 648 floorstander#482 of 648 floorstander
Height1346 mm1235 mm
Width794 mm461 mm
Depth718 mm441 mm
Footprint5701 cm²2033 cm²
Space taken767.3 L251.1 L
Weight100 kg53.5 kg
Enclosure—bass-reflex-down
Drivers1× 25 mm tweeter (K-771-T polyimide compression diaphragm), 1× 51 mm midrange (K-55-X phenolic compression diaphragm), 1× 381 mm woofer (K-33-E fiber-composite cone)2× 25 mm tweeter (Pinnacle ring radiator), 2× 133 mm midrange (Turbine cone), 2× 254 mm woofer (polypropylene cone)
Crossover frequency450 / 4500 Hz370 / 2800 Hz
Frequency — low33 Hz32 Hz
Frequency — high20000 Hz38000 Hz
Sensitivity105 dB87 dB
Impedance8 Ω4 Ω
Recommended amp—25–300 W
MAP (USD)$14,998 / pair$5,998 / pair
Where to buyCheck availability ↗Check availability ↗
Brand websiteklipsch.com ↗polkaudio.com ↗
Product pageOpen product page ↗Open product page ↗

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.