TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A

Stands apply to bookshelves only

Speaker B

Stands apply to bookshelves only

References

Front view — side by side at true scale

AKlipsch La Scala AL6BSonus Faber Olympica Nova III
Klipsch La Scala AL6 front view
Sonus Faber Olympica Nova III front view

Click either cabinet to swap A ↔ B · Reference height: 1104 mm (110.4 cm) · 1 mm = 0.51 px

Plan view — footprint at true scale

front wall
A4044 cm²625 mm647 mm
B1666 cm²363 mm459 mm
0 mm100 mm30 mm

A shelf applies to bookshelf speakers only — one of these stands on the floor.

Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.

Performance — where each one sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
La Scala AL640 Hz19 kHz103 dB8 Ω756 cm²
Olympica Nova III35 Hz35 kHz90 dB4 Ω692 cm²
Median32 Hz30 kHz90 dB6 Ω654 cm²
How to read this chart

Each axis spans the range the 648 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 600 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

Klipsch La Scala AL6vsSonus Faber Olympica Nova III

The Sonus Faber Olympica Nova III stands 110.4 cm tall — about 11.0 cm more than the Klipsch La Scala AL6 at 99.4 cm. On footprint the Klipsch La Scala AL6 is the wider cabinet (62.5 cm versus 36.3 cm). At 103 dB against 90 dB, the Klipsch La Scala AL6 is the easier load to drive and plays louder from the same amplifier. The Sonus Faber Olympica Nova III reaches deeper in the bass, down to 35 Hz versus 40 Hz. Low frequencies come from a 305 mm cone on the Klipsch La Scala AL6 and a 180 mm cone on the Sonus Faber Olympica Nova III. On price, the Klipsch La Scala AL6 sits higher — about $17,498 a pair against $12,500 for the Sonus Faber Olympica Nova III.

Specifications

AB
ManufacturerKlipschSonus Faber
ModelLa Scala AL6Olympica Nova III
HiFi ladder position#132 of 648 floorstander#319 of 648 floorstander
Height994 mm1104 mm
Width625 mm363 mm
Depth647 mm459 mm
Footprint4044 cm²1666 cm²
Space taken401.9 L183.9 L
Weight93 kg35 kg
Enclosure—bass-reflex-rear
Drivers1× 25 mm tweeter (K-771 compression diaphragm), 1× 51 mm midrange (K-933-HP compression diaphragm), 1× 305 mm woofer (K-28 fiber-composite cone)1× 28 mm tweeter (H28 XTR3 soft dome with DAD), 1× 150 mm midrange (MW15 paper cone), 2× 180 mm woofer (W18 paper cone)
Crossover frequency425 / 2900 Hz250 / 2500 Hz
Frequency — low40 Hz35 Hz
Frequency — high19000 Hz35000 Hz
Sensitivity103 dB90 dB
Impedance8 Ω4 Ω
Recommended amp—50–300 W
MAP (USD)$17,498 / pair$12,500 / pair
Where to buyCheck availability ↗Check availability ↗
Brand websiteklipsch.com ↗sonusfaber.com ↗
Product pageOpen product page ↗Open product page ↗

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.