TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A
Speaker B
References

Front view — side by side at true scale

AKlipsch kO-R1BSonus Faber Lumina II
Klipsch kO-R1 front view
Sonus Faber Lumina II front view

Click either cabinet to swap A ↔ B · Reference height: 714 mm (71.4 cm) · 1 mm = 0.78 px

Plan view — footprint at true scale

front wall
A1386 cm²420 mm330 mm
B471 cm²179 mm263 mm
0 mm100 mm30 mm
150 mm500 mm300 mm

Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.

Performance — where each one sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
kO-R151 Hz20 kHz97.5 dB8 Ω736 cm²
Lumina II55 Hz24 kHz86 dB4 Ω183 cm²
Median45 Hz25 kHz87 dB6 Ω219 cm²
How to read this chart

Each axis spans the range the 470 bookshelves in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 385 passive bookshelves — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

Klipsch kO-R1vsSonus Faber Lumina II

The Klipsch kO-R1 stands 71.4 cm tall — about 41.0 cm more than the Sonus Faber Lumina II at 30.4 cm. On footprint the Klipsch kO-R1 is the wider cabinet (42.0 cm versus 17.9 cm). At 97.5 dB against 86 dB, the Klipsch kO-R1 is the easier load to drive and plays louder from the same amplifier. The Klipsch kO-R1 reaches deeper in the bass, down to 51 Hz versus 55 Hz. Low frequencies come from a 305 mm cone on the Klipsch kO-R1 and a 150 mm cone on the Sonus Faber Lumina II. On price, the Klipsch kO-R1 sits higher — about $8,498 a pair against $1,499 for the Sonus Faber Lumina II.

Specifications

AB
ManufacturerKlipschSonus Faber
ModelkO-R1Lumina II
HiFi ladder position#461 of 470 bookshelf#103 of 470 bookshelf
Height714 mm304 mm
Width420 mm179 mm
Depth330 mm263 mm
Footprint1386 cm²471 cm²
Space taken99 L14.3 L
Weight23.6 kg5.8 kg
Enclosurebass-reflex-frontbass-reflex-front
Drivers1× 25 mm tweeter (K-706 titanium compression diaphragm), 1× 305 mm woofer (K-28-E paper cone)1× 29 mm tweeter (DAD soft dome), 1× 150 mm mid-bass (paper cone)
Crossover frequency970 Hz1800 Hz
Frequency — low51 Hz55 Hz
Frequency — high20000 Hz24000 Hz
Sensitivity97.5 dB86 dB
Impedance8 Ω4 Ω
Recommended amp—30–150 W
MAP (USD)$8,498 / pair$1,499 / pair
Where to buyCheck availability ↗Check availability ↗
Brand websiteklipsch.com ↗sonusfaber.com ↗
Product pageOpen product page ↗Open product page ↗

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.