TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A
Speaker B
References

Front view — side by side at true scale

AKlipsch kO-R1BWharfedale Linton
Klipsch kO-R1 front view
Wharfedale Linton front view

Click either cabinet to swap A ↔ B · Reference height: 714 mm (71.4 cm) · 1 mm = 0.78 px

Plan view — footprint at true scale

front wall
A1386 cm²420 mm330 mm
B1080 cm²300 mm360 mm
0 mm100 mm30 mm
150 mm500 mm300 mm

Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.

Performance — where each one sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
kO-R151 Hz20 kHz97.5 dB8 Ω736 cm²
Linton40 Hz20 kHz90 dB6 Ω462 cm²
Median45 Hz25 kHz87 dB6 Ω219 cm²
How to read this chart

Each axis spans the range the 470 bookshelves in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 385 passive bookshelves — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

Klipsch kO-R1vsWharfedale Linton

The Klipsch kO-R1 stands 71.4 cm tall — about 14.9 cm more than the Wharfedale Linton at 56.5 cm. On footprint the Klipsch kO-R1 is the wider cabinet (42.0 cm versus 30.0 cm). At 97.5 dB against 90 dB, the Klipsch kO-R1 is the easier load to drive and plays louder from the same amplifier. The Wharfedale Linton reaches deeper in the bass, down to 40 Hz versus 51 Hz. Low frequencies come from a 305 mm cone on the Klipsch kO-R1 and a 200 mm cone on the Wharfedale Linton. On price, the Klipsch kO-R1 sits higher — about $8,498 a pair against $1,499 for the Wharfedale Linton.

Specifications

AB
ManufacturerKlipschWharfedale
ModelkO-R1Linton 85th Anniversary
HiFi ladder position#461 of 470 bookshelf#429 of 470 bookshelf
Height714 mm565 mm
Width420 mm300 mm
Depth330 mm360 mm
Footprint1386 cm²1080 cm²
Space taken99 L61 L
Weight23.6 kg18.4 kg
Enclosurebass-reflex-frontbass-reflex-rear
Drivers1× 25 mm tweeter (K-706 titanium compression diaphragm), 1× 305 mm woofer (K-28-E paper cone)1× 25 mm tweeter (soft dome), 1× 135 mm midrange (woven Kevlar cone), 1× 200 mm woofer (woven Kevlar cone)
Crossover frequency970 Hz630 / 2400 Hz
Frequency — low51 Hz40 Hz
Frequency — high20000 Hz20000 Hz
Sensitivity97.5 dB90 dB
Impedance8 Ω6 Ω
Recommended amp—25–200 W
MAP (USD)$8,498 / pair$1,499 / pair
Where to buyCheck availability ↗Check on Amazon ↗
Brand websiteklipsch.com ↗wharfedale.co.uk ↗
Product pageOpen product page ↗Open product page ↗

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.