TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A
Speaker B
References

Front view — side by side at true scale

AMonitor Audio Silver 100BSonus Faber Lumina I
Monitor Audio Silver 100 front view
Sonus Faber Lumina I front view

Click either cabinet to swap A ↔ B · Reference height: 375 mm (37.5 cm) · 1 mm = 1.49 px

Plan view — footprint at true scale

front wall
A764 cm²230 mm332 mm
B315 cm²148 mm213 mm
0 mm100 mm30 mm
150 mm500 mm300 mm

Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.

Performance — where each one sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
Silver 10035 Hz35 kHz87.5 dB8 Ω329 cm²
Lumina I65 Hz24 kHz84 dB4 Ω120 cm²
Median45 Hz25 kHz87 dB6 Ω219 cm²
How to read this chart

Each axis spans the range the 470 bookshelves in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 385 passive bookshelves — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

Monitor Audio Silver 100vsSonus Faber Lumina I

The Monitor Audio Silver 100 stands 37.5 cm tall — about 9.5 cm more than the Sonus Faber Lumina I at 28.0 cm. On footprint the Monitor Audio Silver 100 is the wider cabinet (23.0 cm versus 14.8 cm). At 87.5 dB against 84 dB, the Monitor Audio Silver 100 is the easier load to drive and plays louder from the same amplifier. The Monitor Audio Silver 100 reaches deeper in the bass, down to 35 Hz versus 65 Hz. Low frequencies come from a 203 mm cone on the Monitor Audio Silver 100 and a 120 mm cone on the Sonus Faber Lumina I. On price, the Monitor Audio Silver 100 sits higher — about $1,649 a pair against $999 for the Sonus Faber Lumina I.

Specifications

AB
ManufacturerMonitor AudioSonus Faber
ModelSilver 100 7GLumina I
HiFi ladder position#262 of 470 bookshelf#56 of 470 bookshelf
Height375 mm280 mm
Width230 mm148 mm
Depth332 mm213 mm
Footprint764 cm²315 cm²
Space taken28.6 L8.8 L
Weight9.4 kg4.4 kg
Enclosurebass-reflex-rearbass-reflex-front
Drivers1× 25 mm tweeter (C-CAM Gold Dome), 1× 203 mm mid-bass (C-CAM RST II)1× 29 mm tweeter (DAD soft dome), 1× 120 mm mid-bass (paper cone)
Crossover frequency2300 Hz2000 Hz
Frequency — low35 Hz65 Hz
Frequency — high35000 Hz24000 Hz
Sensitivity87.5 dB84 dB
Impedance8 Ω4 Ω
Recommended amp40–120 W30–100 W
MAP (USD)$1,649 / pair$999 / pair
Where to buyCheck on Amazon ↗Check availability ↗
Brand websitemonitoraudio.com ↗sonusfaber.com ↗
Product pageOpen product page ↗Open product page ↗

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.