TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A

Stands apply to bookshelves only

Speaker B

Stands apply to bookshelves only

References

Front view — side by side at true scale

APolk Legend L800BSonus Faber Stradivari G2
Polk Legend L800 front view
Sonus Faber Stradivari G2 front view

Click either cabinet to swap A ↔ B · Reference height: 1374 mm (137.4 cm) · 1 mm = 0.41 px

Plan view — footprint at true scale

front wall
A2033 cm²461 mm441 mm
B3026 cm²707 mm428 mm
0 mm100 mm30 mm

A shelf applies to bookshelf speakers only — one of these stands on the floor.

Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.

Performance — where each one sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
Legend L80032 Hz38 kHz87 dB4 Ω1301 cm²
Stradivari G225 Hz35 kHz92 dB4 Ω1245 cm²
Median32 Hz30 kHz90 dB6 Ω654 cm²
How to read this chart

Each axis spans the range the 648 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 600 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

Polk Legend L800vsSonus Faber Stradivari G2

The Sonus Faber Stradivari G2 stands 137.4 cm tall — about 13.9 cm more than the Polk Legend L800 at 123.5 cm. On footprint the Sonus Faber Stradivari G2 is the wider cabinet (70.7 cm versus 46.1 cm). At 92 dB against 87 dB, the Sonus Faber Stradivari G2 is the easier load to drive and plays louder from the same amplifier. The Sonus Faber Stradivari G2 reaches deeper in the bass, down to 25 Hz versus 32 Hz. On price, the Sonus Faber Stradivari G2 sits higher — about $50,000 a pair against $5,998 for the Polk Legend L800.

Specifications

AB
ManufacturerPolkSonus Faber
ModelLegend L800Stradivari G2
HiFi ladder position#482 of 648 floorstander#566 of 648 floorstander
Height1235 mm1374 mm
Width461 mm707 mm
Depth441 mm428 mm
Footprint2033 cm²3026 cm²
Space taken251.1 L415.8 L
Weight53.5 kg81.5 kg
Enclosurebass-reflex-downbass-reflex-down
Drivers2× 25 mm tweeter (Pinnacle ring radiator), 2× 133 mm midrange (Turbine cone), 2× 254 mm woofer (polypropylene cone)1× 28 mm tweeter (H28 XTR soft dome with DAD), 1× 150 mm midrange (paper cone), 2× 260 mm woofer (paper cone)
Crossover frequency370 / 2800 Hz160 / 220 / 2200 Hz
Frequency — low32 Hz25 Hz
Frequency — high38000 Hz35000 Hz
Sensitivity87 dB92 dB
Impedance4 Ω4 Ω
Recommended amp25–300 W100–600 W
MAP (USD)$5,998 / pair$50,000 / pair
Where to buyCheck availability ↗Check availability ↗
Brand websitepolkaudio.com ↗sonusfaber.com ↗
Product pageOpen product page ↗Open product page ↗

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.