Dynaudio · Focus · Floorstander

Focus 30

Product description
A compact sealed-box active floorstander — the 28 mm Cerotar tweeter with twin 14 cm MSP drivers (midrange + woofer), bi-amped at 110 + 280 + 280 W class-D per speaker. Studio-grade Pascal amplification, full streaming and a WiSA wireless link make it a complete active tower reaching 30 Hz.

Performance — where it sits in the catalog

BassTrebleCone area
Bass reachTreble reachCone area
Focus 3030 Hz22 kHz314 cm²
Median30 Hz24 kHz692 cm²
How to read this chart

Each axis spans the range the 648 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of this speaker's own class, the 48 active floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe. Not shown: Sensitivity, Easy load — the maker publishes no figure. Active speakers quote no sensitivity and no impedance, because with the amplifier inside both describe the electronics rather than the cabinet.

Units
TypeFloorstander
HiFi ladder position#74 of 648 floorstander
PowerActive
Height947 mm
Width275 mm
Depth342 mm
Footprint941 cm²
Space taken89.1 L
Weight16.2 kg
EnclosureSealed
Drivers1× 28 mm tweeter (Cerotar soft dome), 1× 140 mm midrange (MSP cone), 1× 140 mm woofer (MSP cone)
Crossover frequency220 / 2400 Hz
Frequency response30–22000 Hz (±3 dB)
MAP (USD)$8,250 / pair
Amplification (per driver)tweeter 110 W (class D) · midrange 280 W (class D) · woofer 280 W (class D)
Total amp power670 W
Max SPL @ 1 m—
Hi-res audio24 bit / 192 kHz
Wired inputsRCA, Optical (Toslink), Coaxial S/PDIF
Streaming / wirelessAirPlay 2, Google Cast, Bluetooth, Spotify Connect, Tidal Connect, Roon Ready, Wi-Fi, WiSA
Outputs—
Room correctionCustom DSP / app, Dirac Live (limited)
Primary + secondary pairYes
Wireless inter-speaker linkYes
Latency—
Idle power—
Max consumption—
Where to buyCheck availability ↗
Manufacturerdynaudio.com ↗
Product pageOpen product page ↗

Suggested TrueScale comparisons

Tap any speaker to see it beside this one at true, real-world scale.