Fyne Audio · 300i · Bookshelf

F301i

Product description
A larger 300i standmount stepping up to a 150 mm multi-fibre mid-bass and a more efficient 89 dB, rear-ported. More body and low-end reach than the F300i for a small-to-mid room, still an affordable first pair.

Performance — where it sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
F301i44 Hz34 kHz89 dB8 Ω182 cm²
Median45 Hz25 kHz87 dB6 Ω219 cm²
How to read this chart

Each axis spans the range the 470 bookshelves in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of this speaker's own class, the 385 passive bookshelves — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

Units
TypeBookshelf
HiFi ladder position#94 of 470 bookshelf
PowerPassive
Height300 mm
Width190 mm
Depth271 mm
Footprint515 cm²
Space taken15.4 L
Weight5.3 kg
EnclosureBass reflex, rear port
Drivers1× 25 mm tweeter (titanium dome), 1× 150 mm mid-bass (multi-fibre cone)
Crossover frequency3200 Hz
Frequency response44–34000 Hz
Sensitivity89 dB
Impedance8 Ω
Recommended amp35–150 W
Where to buyCheck availability ↗
Manufacturerfyneaudio.com ↗
Product pageOpen product page ↗

Suggested TrueScale comparisons

Tap any speaker to see it beside this one at true, real-world scale.