Klipsch · Heritage · Floorstander

Forte IV

$4,998 / pairCheck on Amazon ↗
Product description
A Heritage three-way horn-loaded floorstander hand-built in Hope, Arkansas — a titanium tweeter and polyimide compression midrange on Tractrix horns over a 12-inch woofer assisted by a rear 15-inch passive radiator. Its 99 dB sensitivity makes it effortless on low-power tube amps, with the lively, dynamic Klipsch horn character.

Performance — where it sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
Forte IV38 Hz20 kHz99 dB8 Ω751 cm²
Median32 Hz30 kHz90 dB6 Ω654 cm²
How to read this chart

Each axis spans the range the 648 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of this speaker's own class, the 600 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

Units
TypeFloorstander
HiFi ladder position#43 of 648 floorstander
PowerPassive
Height908 mm
Width419 mm
Depth330 mm
Footprint1383 cm²
Space taken125.5 L
Weight32.7 kg
EnclosurePassive radiator
Drivers1× 25 mm tweeter (K-100-TI titanium compression diaphragm), 1× 44 mm midrange (K-702 polyimide compression diaphragm), 1× 305 mm woofer (K-281 fiber-composite cone)
Crossover frequency650 / 5200 Hz
Frequency response38–20000 Hz (±3 dB)
Sensitivity99 dB
Impedance8 Ω
Power handling100 W
MAP (USD)$4,998 / pair
Where to buyCheck on Amazon ↗
Manufacturerklipsch.com ↗
Product pageOpen product page ↗

Suggested TrueScale comparisons

Tap any speaker to see it beside this one at true, real-world scale.