Lorenzo Audio · Floorstander

LM1 MK2

Product description
Lorenzo's flagship, and the reason the rest of the range exists: four ways and a 16-inch paper cone in a cabinet 1.72 m tall that weighs 200 kg a side. The walls are 62 mm of phenolic laminated wood with an elastomer layer trapped inside them, machined on a 5-axis CNC, and the drivers are held by solid Panzerholz blocks rather than bolted through the baffle — there are no metal screws in the front. The woofer vents through two rear ports turned by hand from tonewood; the midrange, the 1-inch compression tweeter and the supertweeter each sit in their own sealed chamber. 96 dB into 8 ohms means it will run on 20 watts, though it takes up to 500. The crossover is hand-soldered without a circuit board, on Duelund, Jupiter, Mundorf and Pathaudio parts.

Performance — where it sits in the catalog

BassTrebleSensitivityEasy load
Bass reachTreble reachSensitivityEasy load
LM120 Hz35 kHz96 dB8 Ω
Median32 Hz30 kHz90 dB6 Ω
How to read this chart

Each axis spans the range the 640 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of this speaker's own class, the 592 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe. Not shown: Cone area — the maker publishes no figure.

Units
TypeFloorstander
HiFi ladder position#613 of 640 floorstander
PowerPassive
Height1725 mm
Width555 mm
Depth625 mm
Footprint3469 cm²
Space taken598.4 L
Weight200 kg
EnclosureBass reflex, rear port
Drivers1× 406 mm woofer (paper cone), 1× 279 mm midrange (paper cone), 1× 25 mm tweeter (compression driver), 1× super-tweeter (compression driver)
Frequency response20–35000 Hz
Sensitivity96 dB
Impedance8 Ω
Recommended amp20–500 W
Where to buyCheck availability ↗
Manufacturerlorenzoaudio.com ↗
Product pageOpen product page ↗

Suggested TrueScale comparisons

Tap any speaker to see it beside this one at true, real-world scale.