Lorenzo Audio · Floorstander

LM2

Product description
The LM1's footprint with 32 cm taken off the top: same 555 by 625 mm base, same 16-inch paper woofer in its double rear-vented chamber, but three ways instead of four — a 2-inch compression driver covers mid and mid-high where the flagship splits the job between an 11-inch cone and a 1-inch throat. It reaches the same quoted 20 Hz to 35 kHz and gives up one decibel, 95 against 96. Lorenzo positions it for smaller rooms, which is relative: 1.4 m tall and 140 kg a side. Cabinet, Panzerholz driver mounts, hand-turned wooden ports and hand-soldered crossover are all the flagship's.

Performance — where it sits in the catalog

BassTrebleSensitivityEasy load
Bass reachTreble reachSensitivityEasy load
LM220 Hz35 kHz95 dB8 Ω
Median32 Hz30 kHz90 dB6 Ω
How to read this chart

Each axis spans the range the 640 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of this speaker's own class, the 592 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe. Not shown: Cone area — the maker publishes no figure.

Units
TypeFloorstander
HiFi ladder position#566 of 640 floorstander
PowerPassive
Height1400 mm
Width555 mm
Depth625 mm
Footprint3469 cm²
Space taken485.6 L
Weight140 kg
EnclosureBass reflex, rear port
Drivers1× 406 mm woofer (paper cone), 1× 51 mm midrange (compression driver), 1× tweeter (compression driver)
Frequency response20–35000 Hz
Sensitivity95 dB
Impedance8 Ω
Recommended amp20–500 W
Where to buyCheck availability ↗
Manufacturerlorenzoaudio.com ↗
Product pageOpen product page ↗

Suggested TrueScale comparisons

Tap any speaker to see it beside this one at true, real-world scale.