Suggested TrueScale comparisons
Tap any speaker to see it beside this one at true, real-world scale.
Lorenzo Audio · Floorstander
LM3
Product description
The two-way of the range, and the one that swaps the compression horn for an AMT: a 12-inch paper cone and an air-motion transformer, 25 Hz to 23 kHz, 94 dB. It is also the only Lorenzo that fires its ports at the floor — two of them, downward into the gap its plinth leaves — which is why a 1.17 m cabinet only 41.5 cm deep still reaches 25 Hz. At 55 kg it is less than a third of the flagship's weight, but the construction does not change: 62 mm phenolic laminate with constrained-layer elastomer, Panzerholz where the metal would be, veneer laid by the same fourth-generation hand.
Units
| Type | Floorstander |
|---|---|
| HiFi ladder position | #347 of 523 floorstander |
| Power | Passive |
| Height | 1170 mm |
| Width | 515 mm |
| Depth | 415 mm |
| Weight | 55 kg |
| Enclosure | bass-reflex-down |
| Drivers | 1× 305 mm woofer (paper cone), 1× tweeter (AMT) |
| Frequency response | 25–23000 Hz |
| Sensitivity | 94 dB |
| Impedance | 8 Ω |
| Recommended amp | 20–300 W |
| Where to buy | Check availability ↗ |
| Manufacturer | lorenzoaudio.com ↗ |
| Product page | Open product page ↗ |
Suggested TrueScale comparisons
Tap any speaker to see it beside this one at true, real-world scale.







