Lorenzo Audio · Floorstander

LM6

Product description
Lorenzo's first fully sealed design: no ports anywhere, a single 15-inch paper cone running bass and midrange, and an AMT above it in a shallow waveguide. Sealed costs extension — 27 Hz against the ported LM3's 25, from a cabinet 13 cm taller and 31 kg heavier — and buys the thing sealed boxes always buy, which is a bass that stops when the signal does. 95 dB into 8 ohms. The cabinet is the range's usual 62 mm phenolic laminate with a constrained elastomer layer, driver mounted on Panzerholz blocks instead of screws, and steel feet with Panzerholz discs underneath to break the path to the floor.

Performance — where it sits in the catalog

BassTrebleSensitivityEasy load
Bass reachTreble reachSensitivityEasy load
LM627 Hz23 kHz95 dB8 Ω
Median32 Hz30 kHz90 dB6 Ω
How to read this chart

Each axis spans the range the 640 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of this speaker's own class, the 592 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe. Not shown: Cone area — the maker publishes no figure.

Units
TypeFloorstander
HiFi ladder position#529 of 640 floorstander
PowerPassive
Height1300 mm
Width515 mm
Depth430 mm
Footprint2215 cm²
Space taken287.9 L
Weight86 kg
EnclosureSealed
Drivers1× 381 mm woofer (paper cone), 1× tweeter (AMT)
Frequency response27–23000 Hz
Sensitivity95 dB
Impedance8 Ω
Recommended amp20–300 W
Where to buyCheck availability ↗
Manufacturerlorenzoaudio.com ↗
Product pageOpen product page ↗

Suggested TrueScale comparisons

Tap any speaker to see it beside this one at true, real-world scale.