Suggested TrueScale comparisons
Tap any speaker to see it beside this one at true, real-world scale.
Pylon · Jasper Active · Floorstander
Jasper 25 MkII Active
$9,500 / pairCheck availability ↗
Product description
The top of the Jasper Active range, and the biggest of them: the MkII cabinet with its curved sandwich-MDF front and back, two 18 cm Scan-Speak Revelators and the 0.18 g D2608 dome, each driver fed by its own 150 W Class D module bolted to the rear (450 W a side). The passive crossover is gone, replaced by DSP set in Pylon's own anechoic chamber. A single XLR on the amplifier plate, below the two rear reflex tunnels, is the speaker's only wired input, taking balanced or unbalanced signal; the optional Stereo Hub supplies everything else over WiSA at 24-bit/192 kHz, adding HDMI ARC, three optical, coax, USB-B, RCA and minijack inputs, Chromecast, AirPlay 2, Spotify Connect, Roon Ready and Bluetooth 5.0. Pylon aims it at rooms of 25–50 m². Hand-built in Jarocin, Poland. Sold as a pair; the hub is extra.
Units
| Type | Floorstander |
|---|---|
| HiFi ladder position | #238 of 598 floorstander |
| Power | Active |
| Height | 1066 mm |
| Width | 200 mm |
| Depth | 413 mm |
| Weight | 31 kg |
| Enclosure | Bass reflex, rear port |
| Drivers | 1× 26 mm tweeter (Scan-Speak D2608/913000 silk dome), 2× 180 mm woofer (Scan-Speak 18W/8531G00) |
| Frequency response | 32–20000 Hz |
| MAP (USD) | $9,500 / pair |
| Amplification (per driver) | tweeter 150 W (class D) · woofer 150 W (class D) |
| Total amp power | 450 W |
| Max SPL @ 1 m | — |
| Hi-res audio | 24 bit / 192 kHz |
| Wired inputs | XLR balanced |
| Streaming / wireless | WiSA |
| Outputs | — |
| Room correction | — |
| Primary + secondary pair | No |
| Wireless inter-speaker link | Yes |
| Latency | — |
| Idle power | — |
| Max consumption | — |
| Where to buy | Check availability ↗ |
| Manufacturer | pylon.pl ↗ |
| Product page | Open product page ↗ |
Suggested TrueScale comparisons
Tap any speaker to see it beside this one at true, real-world scale.