TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A

Stands apply to bookshelves only

Speaker B

Stands apply to bookshelves only

References

Front view — side by side at true scale

ABowers & Wilkins 801 D4BDali Rubicon 6
Bowers & Wilkins 801 D4 front view
Dali Rubicon 6 front view

Click either cabinet to swap A ↔ B · Reference height: 1221 mm (122.1 cm) · 1 mm = 0.46 px

Plan view — footprint at true scale

front wall
A2514 cm²419 mm600 mm
B760 cm²200 mm380 mm
0 mm100 mm30 mm

A shelf applies to bookshelf speakers only — one of these stands on the floor.

Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.

Performance — where each one sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
801 D415 Hz28 kHz90 dB8 Ω1163 cm²
Rubicon 638 Hz34 kHz88.5 dB4 Ω450 cm²
Median32 Hz30 kHz90 dB6 Ω654 cm²
How to read this chart

Each axis spans the range the 648 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 600 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

Bowers & Wilkins 801 D4vsDali Rubicon 6

The Bowers & Wilkins 801 D4 stands 122.1 cm tall — about 23.1 cm more than the Dali Rubicon 6 at 99.0 cm. On footprint the Bowers & Wilkins 801 D4 is the wider cabinet (41.9 cm versus 20.0 cm). At 90 dB against 88.5 dB, the Bowers & Wilkins 801 D4 is the easier load to drive and plays louder from the same amplifier. The Bowers & Wilkins 801 D4 reaches deeper in the bass, down to 15 Hz versus 38 Hz. Low frequencies come from a 250 mm cone on the Bowers & Wilkins 801 D4 and a 165 mm cone on the Dali Rubicon 6. On price, the Bowers & Wilkins 801 D4 sits higher — about $35,000 a pair against $4,999 for the Dali Rubicon 6.

Specifications

AB
ManufacturerBowers & WilkinsDali
Model801 D4Rubicon 6
HiFi ladder position#473 of 648 floorstander#127 of 648 floorstander
Height1221 mm990 mm
Width419 mm200 mm
Depth600 mm380 mm
Footprint2514 cm²760 cm²
Space taken307 L75.2 L
Weight100.6 kg20.2 kg
Enclosurebass-reflex-downbass-reflex-rear
Drivers1× 25 mm tweeter (diamond dome), 1× 150 mm midrange (Continuum cone with FST surround), 2× 250 mm woofer (Aerofoil cone)1× 45 mm super-tweeter (ribbon), 1× 29 mm tweeter (soft textile dome), 2× 165 mm mid-bass (wood-fibre cone)
Crossover frequency—800 / 2600 / 14000 Hz
Frequency — low15 Hz38 Hz
Frequency — high28000 Hz34000 Hz
Sensitivity90 dB88.5 dB
Impedance8 Ω4 Ω
Recommended amp50–1000 W40–200 W
MAP (USD)$35,000 / pair$4,999 / pair
Where to buyCheck availability ↗Check availability ↗
Brand websitebowerswilkins.com ↗dali-speakers.com ↗
Product pageOpen product page ↗Open product page ↗

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.