TrueScaleAudio
Compare speakers at true scale
Pick two speakers and see them side by side at their real-world size.
Front view — side by side at true scale
Plan view — footprint at true scale
A shelf applies to bookshelf speakers only — one of these stands on the floor.
Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.
Performance — where each one sits in the catalog
| Bass reach | Treble reach | Sensitivity | Easy load | Cone area | |
|---|---|---|---|---|---|
| Rubicon 6 | 38 Hz | 34 kHz | 88.5 dB | 4 Ω | 450 cm² |
| Klipschorn AK6 | 33 Hz | 20 kHz | 105 dB | 8 Ω | 1165 cm² |
| Median | 32 Hz | 30 kHz | 90 dB | 6 Ω | 654 cm² |
How to read this chart
Each axis spans the range the 648 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 600 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.
Dali Rubicon 6vsKlipsch Klipschorn AK6
The Klipsch Klipschorn AK6 stands 134.6 cm tall — about 35.6 cm more than the Dali Rubicon 6 at 99.0 cm. On footprint the Klipsch Klipschorn AK6 is the wider cabinet (79.4 cm versus 20.0 cm). At 105 dB against 88.5 dB, the Klipsch Klipschorn AK6 is the easier load to drive and plays louder from the same amplifier. The Klipsch Klipschorn AK6 reaches deeper in the bass, down to 33 Hz versus 38 Hz. Low frequencies come from a 165 mm cone on the Dali Rubicon 6 and a 381 mm cone on the Klipsch Klipschorn AK6. On price, the Klipsch Klipschorn AK6 sits higher — about $14,998 a pair against $4,999 for the Dali Rubicon 6.
| A | B | |
|---|---|---|
| Manufacturer | Dali | Klipsch |
| Model | Rubicon 6 | Klipschorn AK6 |
| HiFi ladder position | #127 of 648 floorstander | #553 of 648 floorstander |
| Height | 990 mm | 1346 mm |
| Width | 200 mm | 794 mm |
| Depth | 380 mm | 718 mm |
| Footprint | 760 cm² | 5701 cm² |
| Space taken | 75.2 L | 767.3 L |
| Weight | 20.2 kg | 100 kg |
| Enclosure | bass-reflex-rear | — |
| Drivers | 1× 45 mm super-tweeter (ribbon), 1× 29 mm tweeter (soft textile dome), 2× 165 mm mid-bass (wood-fibre cone) | 1× 25 mm tweeter (K-771-T polyimide compression diaphragm), 1× 51 mm midrange (K-55-X phenolic compression diaphragm), 1× 381 mm woofer (K-33-E fiber-composite cone) |
| Crossover frequency | 800 / 2600 / 14000 Hz | 450 / 4500 Hz |
| Frequency — low | 38 Hz | 33 Hz |
| Frequency — high | 34000 Hz | 20000 Hz |
| Sensitivity | 88.5 dB | 105 dB |
| Impedance | 4 Ω | 8 Ω |
| Recommended amp | 40–200 W | — |
| MAP (USD) | $4,999 / pair | $14,998 / pair |
| Where to buy | Check availability ↗ | Check availability ↗ |
| Brand website | dali-speakers.com ↗ | klipsch.com ↗ |
| Product page | Open product page ↗ | Open product page ↗ |
Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.
