TrueScaleAudio
Compare speakers at true scale
Pick two speakers and see them side by side at their real-world size.
Front view — side by side at true scale
Plan view — footprint at true scale
A shelf applies to bookshelf speakers only — one of these stands on the floor.
Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.
Performance — where each one sits in the catalog
| Bass reach | Treble reach | Sensitivity | Easy load | Cone area | |
|---|---|---|---|---|---|
| Rubicon 6 | 38 Hz | 34 kHz | 88.5 dB | 4 Ω | 450 cm² |
| Reserve R700 | 38 Hz | 38 kHz | 88 dB | 4 Ω | 866 cm² |
| Median | 32 Hz | 30 kHz | 90 dB | 6 Ω | 654 cm² |
How to read this chart
Each axis spans the range the 648 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 600 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.
Dali Rubicon 6vsPolk Reserve R700
The Polk Reserve R700 stands 114.4 cm tall — about 15.4 cm more than the Dali Rubicon 6 at 99.0 cm. On footprint the Polk Reserve R700 is the wider cabinet (32.8 cm versus 20.0 cm). Low frequencies come from a 165 mm cone on the Dali Rubicon 6 and a 203 mm cone on the Polk Reserve R700. On price, the Dali Rubicon 6 sits higher — about $4,999 a pair against $1,499 for the Polk Reserve R700.
| A | B | |
|---|---|---|
| Manufacturer | Dali | Polk |
| Model | Rubicon 6 | Reserve R700 |
| HiFi ladder position | #127 of 648 floorstander | #382 of 648 floorstander |
| Height | 990 mm | 1144 mm |
| Width | 200 mm | 328 mm |
| Depth | 380 mm | 428 mm |
| Footprint | 760 cm² | 1404 cm² |
| Space taken | 75.2 L | 160.6 L |
| Weight | 20.2 kg | 35.9 kg |
| Enclosure | bass-reflex-rear | bass-reflex-down |
| Drivers | 1× 45 mm super-tweeter (ribbon), 1× 29 mm tweeter (soft textile dome), 2× 165 mm mid-bass (wood-fibre cone) | 1× 25 mm tweeter (Pinnacle ring radiator), 1× 165 mm midrange (Turbine cone), 2× 203 mm woofer (polypropylene cone) |
| Crossover frequency | 800 / 2600 / 14000 Hz | 350 / 2700 Hz |
| Frequency — low | 38 Hz | 38 Hz |
| Frequency — high | 34000 Hz | 38000 Hz |
| Sensitivity | 88.5 dB | 88 dB |
| Impedance | 4 Ω | 4 Ω |
| Recommended amp | 40–200 W | 50–300 W |
| MAP (USD) | $4,999 / pair | $1,499 each |
| Where to buy | Check availability ↗ | Check on Amazon ↗ |
| Brand website | dali-speakers.com ↗ | polkaudio.com ↗ |
| Product page | Open product page ↗ | Open product page ↗ |
Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.
