TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A
Speaker B
References

Front view — side by side at true scale

AKEF Q3 MetaBKlipsch kO-R1
KEF Q3 Meta front view
Klipsch kO-R1 front view

Click either cabinet to swap A ↔ B · Reference height: 714 mm (71.4 cm) · 1 mm = 0.78 px

Plan view — footprint at true scale

front wall
A641 cm²210 mm305 mm
B1386 cm²420 mm330 mm
0 mm100 mm30 mm
150 mm500 mm300 mm

Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.

Performance — where each one sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
Q3 Meta49 Hz20 kHz87 dB4 Ω219 cm²
kO-R151 Hz20 kHz97.5 dB8 Ω736 cm²
Median45 Hz25 kHz87 dB6 Ω219 cm²
How to read this chart

Each axis spans the range the 470 bookshelves in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 385 passive bookshelves — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

KEF Q3 MetavsKlipsch kO-R1

The Klipsch kO-R1 stands 71.4 cm tall — about 35.7 cm more than the KEF Q3 Meta at 35.7 cm. On footprint the Klipsch kO-R1 is the wider cabinet (42.0 cm versus 21.0 cm). At 97.5 dB against 87 dB, the Klipsch kO-R1 is the easier load to drive and plays louder from the same amplifier. The KEF Q3 Meta reaches deeper in the bass, down to 49 Hz versus 51 Hz. Low frequencies come from a 165 mm cone on the KEF Q3 Meta and a 305 mm cone on the Klipsch kO-R1. On price, the Klipsch kO-R1 sits higher — about $8,498 a pair against $999 for the KEF Q3 Meta.

Specifications

AB
ManufacturerKEFKlipsch
ModelQ3 MetakO-R1
HiFi ladder position#226 of 470 bookshelf#461 of 470 bookshelf
Height357 mm714 mm
Width210 mm420 mm
Depth305 mm330 mm
Footprint641 cm²1386 cm²
Space taken22.9 L99 L
Weight8.2 kg23.6 kg
Enclosurebass-reflex-rearbass-reflex-front
Drivers1× 25 mm tweeter (MAT aluminium dome), 1× 165 mm mid-bass (aluminium cone)1× 25 mm tweeter (K-706 titanium compression diaphragm), 1× 305 mm woofer (K-28-E paper cone)
Crossover frequency2000 Hz970 Hz
Frequency — low49 Hz51 Hz
Frequency — high20000 Hz20000 Hz
Sensitivity87 dB97.5 dB
Impedance4 Ω8 Ω
Recommended amp15–150 W—
MAP (USD)$999 / pair$8,498 / pair
Where to buyCheck on Amazon ↗Check availability ↗
Brand websiteinternational.kef.com ↗klipsch.com ↗
Product pageOpen product page ↗Open product page ↗

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.