TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A

Stands apply to bookshelves only

Speaker B

Stands apply to bookshelves only

References

Front view — side by side at true scale

AMonitor Audio Gold 300BPolk Reserve R700
Monitor Audio Gold 300 front view
Polk Reserve R700 front view

Click either cabinet to swap A ↔ B · Reference height: 1144 mm (114.4 cm) · 1 mm = 0.49 px

Plan view — footprint at true scale

front wall
A1570 cm²339 mm463 mm
B1404 cm²328 mm428 mm
0 mm100 mm30 mm

A shelf applies to bookshelf speakers only — one of these stands on the floor.

Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.

Performance — where each one sits in the catalog

BassTrebleSensitivityEasy load
Bass reachTreble reachSensitivityEasy load
Gold 30028 Hz60 kHz87 dB4 Ω
Reserve R70038 Hz38 kHz88 dB4 Ω
Median32 Hz30 kHz90 dB6 Ω
How to read this chart

Each axis spans the range the 648 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 600 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe. Not shown: Cone area — published by only one of the two. An outline reaching one more vertex than its neighbour reads as the bigger speaker when the only difference is which maker filled in a spec sheet. The figure is still in the table below.

Monitor Audio Gold 300vsPolk Reserve R700

The Polk Reserve R700 stands 114.4 cm tall — about 4.6 cm more than the Monitor Audio Gold 300 at 109.8 cm. On footprint the Monitor Audio Gold 300 is the wider cabinet (33.9 cm versus 32.8 cm). At 88 dB against 87 dB, the Polk Reserve R700 is the easier load to drive and plays louder from the same amplifier. The Monitor Audio Gold 300 reaches deeper in the bass, down to 28 Hz versus 38 Hz. Low frequencies come from a 152 mm cone on the Monitor Audio Gold 300 and a 203 mm cone on the Polk Reserve R700. On price, the Monitor Audio Gold 300 sits higher — about $6,199 a pair against $1,499 for the Polk Reserve R700.

Specifications

AB
ManufacturerMonitor AudioPolk
ModelGold 300 6GReserve R700
HiFi ladder position#295 of 648 floorstander#382 of 648 floorstander
Height1098 mm1144 mm
Width339 mm328 mm
Depth463 mm428 mm
Footprint1570 cm²1404 cm²
Space taken172.3 L160.6 L
Weight21.2 kg35.9 kg
Enclosurebass-reflex-rearbass-reflex-down
Drivers1× tweeter (MPD III (Air Motion Transformer)), 1× 76 mm midrange (HDT C-CAM), 2× 152 mm woofer (HDT C-CAM)1× 25 mm tweeter (Pinnacle ring radiator), 1× 165 mm midrange (Turbine cone), 2× 203 mm woofer (polypropylene cone)
Crossover frequency800 / 2700 Hz350 / 2700 Hz
Frequency — low28 Hz38 Hz
Frequency — high60000 Hz38000 Hz
Sensitivity87 dB88 dB
Impedance4 Ω4 Ω
Recommended amp130–500 W50–300 W
MAP (USD)$6,199 / pair$1,499 each
Where to buyCheck availability ↗Check on Amazon ↗
Brand websitemonitoraudio.com ↗polkaudio.com ↗
Product pageOpen product page ↗Open product page ↗

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.